[PATCH 10/14] arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema

[Krzysztof Kozlowski]

DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix:

  qcom/sc7280-herobrine-crd.dtb: pmic@2: gpio@8800: 'edp-bl-reg-en' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts  | 2 +-
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index 7881bbc641a0..269bc4c42791 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -167,7 +167,7 @@ &pm8350c_gpios {
 			  "PMIC_EDP_BL_PWM",
 			  "";
 
-	edp_bl_reg_en: edp-bl-reg-en {
+	edp_bl_reg_en: edp-bl-reg-en-state {
 		pins = "gpio6";
 		function = "normal";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 7747081b9887..56a510b150ab 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -522,7 +522,7 @@ &pmi8998_wled {
 };
 
 &pm8998_gpio {
-	volume_up_gpio: pm8998_gpio6 {
+	volume_up_gpio: pm8998-gpio6-state {
 		pinconf {
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 			function = "normal";
-- 
2.34.1