[PATCH v5] Remove duplicated words across the whole documentation
From: Jules Maselbas
Date: Mon Aug 29 2022 - 05:29:22 EST
Remove duplicated words (the, at, be ...) across the whole documentation.
In some cases the duplicated words are replaced by something that makes
more sense, for instance: "be be" is replaced by "can be" when possible.
There are likely more duplicated words.
CC: Conor.Dooley@xxxxxxxxxxxxx
CC: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
CC: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
CC: linux-doc@xxxxxxxxxxxxxxx
Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
---
in v5:
- remove spurious changes reported by Randy Dunlap
in v4:
- remove spurious changes reported by Conor Dooley
in v3:
as suggested by Randy Dunlap:
- remove duplicated 'The the '
- remove duplicated 'at at ' (some are replaced by 'at a ')
- remove duplicated be, is, to, we, on ...
in v2:
- also remove the second 'the' in one sentence as suggested by
Bagas Sanjaya
---
Documentation/RCU/checklist.rst | 2 +-
Documentation/admin-guide/kdump/vmcoreinfo.rst | 2 +-
Documentation/bpf/instruction-set.rst | 2 +-
Documentation/bpf/map_cgroup_storage.rst | 4 ++--
Documentation/core-api/cpu_hotplug.rst | 3 +--
Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml | 4 ++--
.../devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt | 2 +-
Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt | 2 +-
Documentation/devicetree/bindings/fpga/fpga-region.txt | 4 ++--
Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml | 2 +-
Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml | 2 +-
Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml | 2 +-
.../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 +-
.../devicetree/bindings/net/can/microchip,mcp251xfd.yaml | 2 +-
Documentation/driver-api/isa.rst | 2 +-
Documentation/filesystems/caching/backend-api.rst | 2 +-
Documentation/filesystems/journalling.rst | 2 +-
Documentation/hwmon/f71882fg.rst | 2 +-
Documentation/locking/seqlock.rst | 2 +-
Documentation/sphinx/cdomain.py | 2 +-
Documentation/trace/histogram.rst | 2 +-
Documentation/userspace-api/media/dvb/dmx-reqbufs.rst | 2 +-
Documentation/userspace-api/media/dvb/frontend_f_open.rst | 2 +-
23 files changed, 26 insertions(+), 27 deletions(-)
diff --git a/Documentation/RCU/checklist.rst b/Documentation/RCU/checklist.rst
index 42cc5d891bd2..7b1c85a16dc3 100644
--- a/Documentation/RCU/checklist.rst
+++ b/Documentation/RCU/checklist.rst
@@ -477,6 +477,6 @@ over a rather long period of time, but improvements are always welcome!
So if you need to wait for both an RCU grace period and for
all pre-existing call_rcu() callbacks, you will need to execute
both rcu_barrier() and synchronize_rcu(), if necessary, using
- something like workqueues to to execute them concurrently.
+ something like workqueues to execute them concurrently.
See rcubarrier.rst for more information.
diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 8419019b6a88..6726f439958c 100644
--- a/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -200,7 +200,7 @@ prb
A pointer to the printk ringbuffer (struct printk_ringbuffer). This
may be pointing to the static boot ringbuffer or the dynamically
-allocated ringbuffer, depending on when the the core dump occurred.
+allocated ringbuffer, depending on when the core dump occurred.
Used by user-space tools to read the active kernel log buffer.
printk_rb_static
diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst
index 1b0e6711dec9..0ac7ae40be37 100644
--- a/Documentation/bpf/instruction-set.rst
+++ b/Documentation/bpf/instruction-set.rst
@@ -133,7 +133,7 @@ code field of ``BPF_END``.
The byte swap instructions operate on the destination register
only and do not use a separate source register or immediate value.
-The 1-bit source operand field in the opcode is used to to select what byte
+The 1-bit source operand field in the opcode is used to select what byte
order the operation convert from or to:
========= ===== =================================================
diff --git a/Documentation/bpf/map_cgroup_storage.rst b/Documentation/bpf/map_cgroup_storage.rst
index cab9543017bf..8e5fe532c07e 100644
--- a/Documentation/bpf/map_cgroup_storage.rst
+++ b/Documentation/bpf/map_cgroup_storage.rst
@@ -31,7 +31,7 @@ The map uses key of type of either ``__u64 cgroup_inode_id`` or
};
``cgroup_inode_id`` is the inode id of the cgroup directory.
-``attach_type`` is the the program's attach type.
+``attach_type`` is the program's attach type.
Linux 5.9 added support for type ``__u64 cgroup_inode_id`` as the key type.
When this key type is used, then all attach types of the particular cgroup and
@@ -155,7 +155,7 @@ However, the BPF program can still only associate with one map of each type
``BPF_MAP_TYPE_CGROUP_STORAGE`` or more than one
``BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE``.
-In all versions, userspace may use the the attach parameters of cgroup and
+In all versions, userspace may use the attach parameters of cgroup and
attach type pair in ``struct bpf_cgroup_storage_key`` as the key to the BPF map
APIs to read or update the storage for a given attachment. For Linux 5.9
attach type shared storages, only the first value in the struct, cgroup inode
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst
index c6f4ba2fb32d..c326f4a86d34 100644
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -560,8 +560,7 @@ available:
* cpuhp_state_remove_instance(state, node)
* cpuhp_state_remove_instance_nocalls(state, node)
-The arguments are the same as for the the cpuhp_state_add_instance*()
-variants above.
+The arguments are the same as for cpuhp_state_add_instance*() variants above.
The functions differ in the way how the installed callbacks are treated:
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index a4b4452afc1d..e5b56ee500bc 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -121,7 +121,7 @@ properties:
arm,vexpress,position:
description: When daughterboards are stacked on one site, their position
- in the stack be be described this attribute.
+ in the stack can be described with this attribute.
$ref: '/schemas/types.yaml#/definitions/uint32'
minimum: 0
maximum: 3
@@ -139,7 +139,7 @@ patternProperties:
the connection between the motherboard and any tiles. Sometimes the
compatible is placed directly under this node, sometimes it is placed
in a subnode named "motherboard-bus". Sometimes the compatible includes
- "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+ "arm,vexpress,v2?-p1" sometimes (on software models) it is just
"simple-bus". If the compatible is placed in the "motherboard-bus" node,
it is stricter and always has two compatibles.
type: object
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
index 9a4295b54539..b300c42c52d7 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -8,7 +8,7 @@ Required properties:
- reg : Should contain 1 register ranges(address and length). For
Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004
0x10c>. For Tegra124, Tegra132 and Tegra210 chips, the value should
- be be <0x6000c000 0x150>.
+ be <0x6000c000 0x150>.
Example (for a Tegra20 chip):
ahb: ahb@6000c004 {
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index b849a1ed389d..47e477cce6d2 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible: "ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
"ti,am335x-edma-crossbar" for AM335x and AM437x
- reg: Memory map for accessing module
-- #dma-cells: Should be set to to match with the DMA controller's dma-cells
+- #dma-cells: Should be set to match with the DMA controller's dma-cells
for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
- dma-requests: Number of DMA requests the crossbar can receive
- dma-masters: phandle pointing to the DMA controller
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 6694ef29a267..095b5e728dff 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -50,7 +50,7 @@ Partial Reconfiguration Region (PRR)
Persona
* Also called a "partial bit stream"
* An FPGA image that is designed to be loaded into a PRR. There may be
- any number of personas designed to fit into a PRR, but only one at at time
+ any number of personas designed to fit into a PRR, but only one at a time
may be loaded.
* A persona may create more regions.
@@ -127,7 +127,7 @@ add the child devices:
* FPGA Manager
* FPGA Bridges
- * image-specific information needed to to the programming.
+ * image-specific information needed to do the programming.
* child nodes
The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
index f6cac4b1079c..3549a32452ec 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -26,7 +26,7 @@ properties:
'#gpio-cells':
description:
The first cell is the pin number.
- The second cell is is used to specify flags.
+ The second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
index dc5a29b5ef7d..43a3f7ccaf36 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -26,7 +26,7 @@ properties:
'#gpio-cells':
description:
The first cell is the pin number.
- The second cell is is used to specify flags.
+ The second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
index 012d25111054..373c4f89c4ea 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -28,7 +28,7 @@ properties:
'#gpio-cells':
description:
The first cell is the pin number.
- The second cell is is used to specify flags.
+ The second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 608e1d62bed5..3eb0513d824c 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -149,7 +149,7 @@ properties:
- description:
The first register range should be the one of the DWMAC controller
- description:
- The second range is is for the Amlogic specific configuration
+ The second range is for the Amlogic specific configuration
(for example the PRG_ETHERNET register range on Meson8b and newer)
required:
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
index 7a73057707b4..0415c3a886ca 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -42,7 +42,7 @@ properties:
microchip,rx-int-gpios:
description:
- GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+ GPIO phandle of GPIO connected to INT1 pin of the MCP251XFD, which
signals a pending RX interrupt.
maxItems: 1
diff --git a/Documentation/driver-api/isa.rst b/Documentation/driver-api/isa.rst
index def4a7b690b5..3df1b1696524 100644
--- a/Documentation/driver-api/isa.rst
+++ b/Documentation/driver-api/isa.rst
@@ -100,7 +100,7 @@ I believe platform_data is available for this, but if rather not, moving
the isa_driver pointer to the private struct isa_dev is ofcourse fine as
well.
-Then, if the the driver did not provide a .match, it matches. If it did,
+Then, if the driver did not provide a .match, it matches. If it did,
the driver match() method is called to determine a match.
If it did **not** match, dev->platform_data is reset to indicate this to
diff --git a/Documentation/filesystems/caching/backend-api.rst b/Documentation/filesystems/caching/backend-api.rst
index d7507becf674..3a199fc50828 100644
--- a/Documentation/filesystems/caching/backend-api.rst
+++ b/Documentation/filesystems/caching/backend-api.rst
@@ -122,7 +122,7 @@ volumes, calling::
to tell fscache that a volume has been withdrawn. This waits for all
outstanding accesses on the volume to complete before returning.
-When the the cache is completely withdrawn, fscache should be notified by
+When the cache is completely withdrawn, fscache should be notified by
calling::
void fscache_relinquish_cache(struct fscache_cache *cache);
diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst
index e18f90ffc6fd..2a69bd2d95ed 100644
--- a/Documentation/filesystems/journalling.rst
+++ b/Documentation/filesystems/journalling.rst
@@ -93,7 +93,7 @@ easily as on jbd2_journal_start().
Try to reserve the right number of blocks the first time. ;-). This will
be the maximum number of blocks you are going to touch in this
-transaction. I advise having a look at at least ext4_jbd.h to see the
+transaction. I advise having at least a look at ext4_jbd.h to see the
basis on which ext4 uses to make these decisions.
Another wriggle to watch out for is your on-disk block allocation
diff --git a/Documentation/hwmon/f71882fg.rst b/Documentation/hwmon/f71882fg.rst
index 38e30fbd4806..ab83bc7bbbdf 100644
--- a/Documentation/hwmon/f71882fg.rst
+++ b/Documentation/hwmon/f71882fg.rst
@@ -179,7 +179,7 @@ Writing an unsupported mode will result in an invalid parameter error.
* 2: Normal auto mode
You can define a number of temperature/fan speed trip points, which % the
- fan should run at at this temp and which temp a fan should follow using the
+ fan should run at this temp and which temp a fan should follow using the
standard sysfs interface. The number and type of trip points is chip
depended, see which files are available in sysfs.
Fan/PWM channel 3 of the F8000 is always in this mode!
diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst
index 64405e5da63e..bfda1a5fecad 100644
--- a/Documentation/locking/seqlock.rst
+++ b/Documentation/locking/seqlock.rst
@@ -39,7 +39,7 @@ as the writer can invalidate a pointer that the reader is following.
Sequence counters (``seqcount_t``)
==================================
-This is the the raw counting mechanism, which does not protect against
+This is the raw counting mechanism, which does not protect against
multiple writers. Write side critical sections must thus be serialized
by an external lock.
diff --git a/Documentation/sphinx/cdomain.py b/Documentation/sphinx/cdomain.py
index ca8ac9e59ded..a7d1866e72ff 100644
--- a/Documentation/sphinx/cdomain.py
+++ b/Documentation/sphinx/cdomain.py
@@ -151,7 +151,7 @@ class CObject(Base_CObject):
def handle_func_like_macro(self, sig, signode):
u"""Handles signatures of function-like macros.
- If the objtype is 'function' and the the signature ``sig`` is a
+ If the objtype is 'function' and the signature ``sig`` is a
function-like macro, the name of the macro is returned. Otherwise
``False`` is returned. """
diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst
index 859fd1b76c63..c1b685a38f6b 100644
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -412,7 +412,7 @@ Extended error information
Because the default sort key above is 'hitcount', the above shows a
the list of call_sites by increasing hitcount, so that at the bottom
we see the functions that made the most kmalloc calls during the
- run. If instead we we wanted to see the top kmalloc callers in
+ run. If instead we wanted to see the top kmalloc callers in
terms of the number of bytes requested rather than the number of
calls, and we wanted the top caller to appear at the top, we can use
the 'sort' parameter, along with the 'descending' modifier::
diff --git a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
index d2bb1909ec98..18810f0bbca8 100644
--- a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
@@ -72,4 +72,4 @@ appropriately. The generic error codes are described at the
:ref:`Generic Error Codes <gen-errors>` chapter.
EOPNOTSUPP
- The the requested I/O method is not supported.
+ The requested I/O method is not supported.
diff --git a/Documentation/userspace-api/media/dvb/frontend_f_open.rst b/Documentation/userspace-api/media/dvb/frontend_f_open.rst
index bb37eded0870..70e169b8f601 100644
--- a/Documentation/userspace-api/media/dvb/frontend_f_open.rst
+++ b/Documentation/userspace-api/media/dvb/frontend_f_open.rst
@@ -91,7 +91,7 @@ appropriately.
- The caller has no permission to access the device.
- - ``EBUSY``
- - The the device driver is already in use.
+ - The device driver is already in use.
- - ``EMFILE``
- The process already has the maximum number of files open.
--
2.17.1