Re: [PATCH v2 13/16] hwmon: (mr75203) add thermal coefficient properties for Moortec PVT controller

[Farber, Eliav]

On 8/22/2022 7:25 PM, Guenter Roeck wrote:
> On Mon, Aug 22, 2022 at 04:24:20PM +0300, Farber, Eliav wrote:
> > On 8/18/2022 11:25 PM, Guenter Roeck wrote:
> > > On Wed, Aug 17, 2022 at 05:43:18AM +0000, Eliav Farber wrote:
> > > > Add optional "ts-coeff-g", "ts-coeff-h", "ts-coeff-cal5" and
> > > > "ts-coeff-j" properties to be used instead of defaults for the
> > > > thermal equasion.
> > > >
> > > Vendor prefix again, and shouldn;t there be some note about the
> > > to-be-used defaults ?
> > Can you please explain why to add a vendor prefix to these properties
> > (and also to all other properties I added in this series)?
> > All the properties I added are not specific to our SOC, and any other
> > vendor using the same mr75203 ip block in their SOC, can also use the 
> > new
> > properties.
>
> To me it seems that the properties are very mr75203 and thus vendor
> specific.
>
> However, I am not a DT maintainer. Stepping back to let DT maintainers
> respond and state their preferences.

I added "moortec" prefix to all the new properties I added in this
series.
Will be part of v3.

--
Thanks, Eliav