Re: [RESEND PATCH v3 2/2] PCI/PTM: fix to maintain pci_dev->ptm_enabled

[Bjorn Helgaas]

On Tue, Aug 30, 2022 at 08:03:41PM +0200, Rafael J. Wysocki wrote:
> On Tue, Aug 30, 2022 at 7:37 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > On Tue, Aug 30, 2022 at 06:58:20PM +0200, Rafael J. Wysocki wrote:
> > > On Tue, Aug 30, 2022 at 6:25 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > > > On Tue, Aug 30, 2022 at 03:49:13AM -0700, Rajvi Jingar wrote:
> > > > > pci_dev->ptm_enabled needs to be maintained to reflect the current PTM
> > > > > state of the device. In pci_ptm_disable(), clear ptm_enabled from
> > > > > 'struct pci_dev' on disabling PTM state for the device.
> > > > > In pci_restore_ptm_state(), set dev->ptm_enabled based on the restored
> > > > > PTM state of the device.
> > > > >
> > > > > In pci_ptm_disable(), perform ptm_enabled check to avoid config space
> > > > > access in case if PTM is already disabled for the device. ptm_enabled
> > > > > won't be set for non-PCIe devices so pci_is_pcie(dev) check is not
> > > > > needed anymore.
> > > >
> > > > This one sounds like it's supposed to fix something, but I'm not clear
> > > > exactly what.
> > > >
> > > > I have a vague memory of config accesses messing up a low power state.
> > > > But this is still completely magical and unmaintainable since AFAIK
> > > > there is nothing in the PCIe spec about avoiding config accesses when
> > > > PTM is disabled.
> >
> > I'm remembering this, which seemed like an ancestor of this patch:
> > https://lore.kernel.org/r/CAJZ5v0gNy6YJA+RNTEyHBdoJK-jqKN60oU_k_LX4=cTuyoO2mg@xxxxxxxxxxxxxx
> >
> > This patch is queued up and does something similar (disabling PTM on
> > all devices before suspend):
> > https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?id=d878400c7d98
> >
> > Is d878400c7d98 enough to solve the functional issue, and this patch
> > is basically a cleanup?  I think it's a nice cleanup and worth doing.
> 
> This patch is independent of d878400c7d98.  We've been working on a
> d878400c7d98 counterpart on top of this patch.
> 
> There is a problem with d878400c7d98 that disabling PTM from
> pci_prepare_to_sleep() is not enough, because that function is not
> called for some endpoints where we also want to disable PTM on system
> suspend.
> 
> IMV the most suitable place to disable PTM (temporarily) on
> system-wide suspend is in pci_pm_suspend_noirq(, because it is the
> last piece of generic PCI code running for all PCI devices regardless
> of what their drivers do.
>
> > I'm just trying to figure out the "avoid config space access" in the
> > commit log.  If avoiding config space access is necessary, it needs
> > more explanation.

AFAICT, these are great cleanups but neither of these patches is
really a functional change.  If that's true, the "avoid config space
access" should be removed from the commit log.

I dropped d878400c7d98 for now and updated my pci/pm branch with just
these two patches with updates as attached below.

Then we can rework d878400c7d98 so it disables PTM unconditionally in
pci_pm_suspend_noirq() instead of in pci_prepare_to_sleep().

Currently, or with d878400c7d98, we only call pci_prepare_to_sleep()
when (!skip_bus_pm && !state_saved && pci_power_manageable()), so if a
driver saves its own state, we won't disable PTM, which seems like a
problem.

I assume we also want to move the pci_disable_ptm() from
pci_finish_runtime_suspend() to pci_pm_runtime_suspend() to keep it
parallel with pci_pm_suspend_noirq().

Is this making sense?

> > > Because ptm_enabled is expected to always reflect the hardware state,
> > > pci_disable_ptm() needs to be amended to clear it.  Also it is prudent
> > > to explicitly make it reflect the new hardware state in
> > > pci_restore_ptm_state().
> > >
> > > Then, pci_disable_ptm() can be made bail out if ptm_enabled is clear,
> > > because it has nothing to do then and the pci_is_pcie() check in there
> > > is not necessary, because ptm_enabled will never be set for devices
> > > that are not PCIe.
> > >
> > > > At the very least, we would need more details in the commit log and
> > > > a hint in the code about this.

commit 22b07d9ddd02 ("PCI/PTM: Update pdev->ptm_enabled to track hardware state")
Author: Rajvi Jingar <rajvi.jingar@xxxxxxxxxxxxxxx>
Date:   Tue Aug 30 03:49:13 2022 -0700

    PCI/PTM: Update pdev->ptm_enabled to track hardware state
    
    Update pdev->ptm_enabled to track hardware state when we disable or restore
    PTM state.
    
    No functional change intended, since 'ptm_enabled' was previously only
    tested during enumeration and pci_disable_ptm() is only used during
    suspend.
    
    [bhelgaas: commit log]
    Link: https://lore.kernel.org/r/20220830104913.1620539-2-rajvi.jingar@xxxxxxxxxxxxxxx
    Signed-off-by: Rajvi Jingar <rajvi.jingar@xxxxxxxxxxxxxxx>
    Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
    Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
index 368a254e3124..1ce241d4538f 100644
--- a/drivers/pci/pcie/ptm.c
+++ b/drivers/pci/pcie/ptm.c
@@ -34,7 +34,7 @@ void pci_disable_ptm(struct pci_dev *dev)
 	int ptm;
 	u16 ctrl;
 
-	if (!pci_is_pcie(dev))
+	if (!dev->ptm_enabled)
 		return;
 
 	ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
@@ -44,6 +44,7 @@ void pci_disable_ptm(struct pci_dev *dev)
 	pci_read_config_word(dev, ptm + PCI_PTM_CTRL, &ctrl);
 	ctrl &= ~(PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT);
 	pci_write_config_word(dev, ptm + PCI_PTM_CTRL, ctrl);
+	dev->ptm_enabled = 0;
 }
 
 void pci_save_ptm_state(struct pci_dev *dev)
@@ -83,6 +84,7 @@ void pci_restore_ptm_state(struct pci_dev *dev)
 
 	cap = (u16 *)&save_state->cap.data[0];
 	pci_write_config_word(dev, ptm + PCI_PTM_CTRL, *cap);
+	dev->ptm_enabled = !!(*cap & PCI_PTM_CTRL_ENABLE);
 }
 
 void pci_ptm_init(struct pci_dev *dev)

commit 6e594f65471b ("PCI/PM: Simplify pci_pm_suspend_noirq()")
Author: Rajvi Jingar <rajvi.jingar@xxxxxxxxxxxxxxx>
Date:   Tue Aug 30 03:49:12 2022 -0700

    PCI/PM: Simplify pci_pm_suspend_noirq()
    
    We always want to save the device state unless the driver has already done
    it.  Rearrange the checking in pci_pm_suspend_noirq() to make this more
    clear.  No functional change intended.
    
    [bhelgaas: commit log, rewrap comment]
    Link: https://lore.kernel.org/r/20220830104913.1620539-1-rajvi.jingar@xxxxxxxxxxxxxxx
    Signed-off-by: Rajvi Jingar <rajvi.jingar@xxxxxxxxxxxxxxx>
    Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
    Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 49238ddd39ee..2815922ac525 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -867,20 +867,15 @@ static int pci_pm_suspend_noirq(struct device *dev)
 		}
 	}
 
-	if (pci_dev->skip_bus_pm) {
+	if (!pci_dev->state_saved) {
+		pci_save_state(pci_dev);
+
 		/*
-		 * Either the device is a bridge with a child in D0 below it, or
-		 * the function is running for the second time in a row without
-		 * going through full resume, which is possible only during
-		 * suspend-to-idle in a spurious wakeup case.  The device should
-		 * be in D0 at this point, but if it is a bridge, it may be
-		 * necessary to save its state.
+		 * If the device is a bridge with a child in D0 below it,
+		 * it needs to stay in D0, so check skip_bus_pm to avoid
+		 * putting it into a low-power state in that case.
 		 */
-		if (!pci_dev->state_saved)
-			pci_save_state(pci_dev);
-	} else if (!pci_dev->state_saved) {
-		pci_save_state(pci_dev);
-		if (pci_power_manageable(pci_dev))
+		if (!pci_dev->skip_bus_pm && pci_power_manageable(pci_dev))
 			pci_prepare_to_sleep(pci_dev);
 	}