[PATCH v2 1/3] dt-bindings: reset: syscon-reboot: Add priority property

[Pali Rohár]

This new optional priority property allows to specify custom priority level
of reset device. Default level was always 192.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>

---
Changes in v2:
* Change sint32 to int32
* Add default
---
 .../devicetree/bindings/power/reset/syscon-reboot.yaml       | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index da2509724812..4c8b0d0a0111 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -42,6 +42,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: The reset value written to the reboot register (32 bit access).
 
+  priority:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description: Priority level of this syscon reset device.
+    default: 192
+
 required:
   - compatible
   - offset
-- 
2.20.1