[PATCH v3 1/3] dt-bindings: reset: syscon-reboot: Add priority property

[Pali Rohár]

This new optional priority property allows to specify custom priority level
of reset device. Prior this change priority level was hardcoded to 192 and
not possible to specify or change. Specifying other value is needed for
some boards. Default level when not specified stays at 192 as before.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>

---
Changes in v3:
* Add explanation into commit message

Changes in v2:
* Change sint32 to int32
* Add default
---
 .../devicetree/bindings/power/reset/syscon-reboot.yaml       | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index da2509724812..4c8b0d0a0111 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -42,6 +42,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: The reset value written to the reboot register (32 bit access).
 
+  priority:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description: Priority level of this syscon reset device.
+    default: 192
+
 required:
   - compatible
   - offset
-- 
2.20.1