[PATCH] mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver

[Linus Walleij]

Instead of passing GPIO numbers pertaining to ourselves through
platform data, just request GPIO descriptors from our own GPIO
chips and use them, and cut down on the unnecessary complexity.

Cc: Aaro Koskinen <aaro.koskinen@xxxxxx>
Cc: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Cory Maccarrone <darkstar6262@xxxxxxxxx>
Cc: linux-omap@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
If one of the OMAP1 people can provide an ACK then it's best
if Lee takes this into the MFD tree.
---
 arch/arm/mach-omap1/board-htcherald.c |  9 ----
 drivers/mfd/htc-i2cpld.c              | 59 ++++++++++++---------------
 include/linux/htcpld.h                |  2 -
 3 files changed, 26 insertions(+), 44 deletions(-)

diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index ec049cee49c6..291d294b5824 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -141,13 +141,6 @@
 #define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
 #define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
 
-/*
- * The htcpld chip requires a gpio write to a specific line
- * to re-enable interrupts after one has occurred.
- */
-#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
-#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
-
 /* Chip 5 */
 #define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
 #define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
@@ -348,8 +341,6 @@ static struct htcpld_chip_platform_data htcpld_chips[] = {
 };
 
 static struct htcpld_core_platform_data htcpld_pfdata = {
-	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
-	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
 	.i2c_adapter_id	   = 1,
 
 	.chip		   = htcpld_chips,
diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c
index 417b0355d904..a6d47ce27efe 100644
--- a/drivers/mfd/htc-i2cpld.c
+++ b/drivers/mfd/htc-i2cpld.c
@@ -20,7 +20,9 @@
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 #include <linux/htcpld.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 
 struct htcpld_chip {
@@ -58,8 +60,8 @@ struct htcpld_data {
 	uint               irq_start;
 	int                nirqs;
 	uint               chained_irq;
-	unsigned int       int_reset_gpio_hi;
-	unsigned int       int_reset_gpio_lo;
+	struct gpio_desc   *int_reset_gpio_hi;
+	struct gpio_desc   *int_reset_gpio_lo;
 
 	/* htcpld info */
 	struct htcpld_chip *chip;
@@ -196,9 +198,9 @@ static irqreturn_t htcpld_handler(int irq, void *dev)
 	 * be asserted.
 	 */
 	if (htcpld->int_reset_gpio_hi)
-		gpio_set_value(htcpld->int_reset_gpio_hi, 1);
+		gpiod_set_value(htcpld->int_reset_gpio_hi, 1);
 	if (htcpld->int_reset_gpio_lo)
-		gpio_set_value(htcpld->int_reset_gpio_lo, 0);
+		gpiod_set_value(htcpld->int_reset_gpio_lo, 0);
 
 	return IRQ_HANDLED;
 }
@@ -562,35 +564,26 @@ static int htcpld_core_probe(struct platform_device *pdev)
 		return ret;
 
 	/* Request the GPIO(s) for the int reset and set them up */
-	if (pdata->int_reset_gpio_hi) {
-		ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
-		if (ret) {
-			/*
-			 * If it failed, that sucks, but we can probably
-			 * continue on without it.
-			 */
-			dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
-			htcpld->int_reset_gpio_hi = 0;
-		} else {
-			htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
-			gpio_set_value(htcpld->int_reset_gpio_hi, 1);
-		}
-	}
+	htcpld->int_reset_gpio_hi = gpiochip_request_own_desc(&htcpld->chip[2].chip_out,
+							      7, "htcpld-core", GPIO_ACTIVE_HIGH,
+							      GPIOD_OUT_HIGH);
+	if (!htcpld->int_reset_gpio_hi)
+		/*
+		 * If it failed, that sucks, but we can probably
+		 * continue on without it.
+		 */
+		dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
 
-	if (pdata->int_reset_gpio_lo) {
-		ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
-		if (ret) {
-			/*
-			 * If it failed, that sucks, but we can probably
-			 * continue on without it.
-			 */
-			dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
-			htcpld->int_reset_gpio_lo = 0;
-		} else {
-			htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
-			gpio_set_value(htcpld->int_reset_gpio_lo, 0);
-		}
-	}
+
+	htcpld->int_reset_gpio_lo = gpiochip_request_own_desc(&htcpld->chip[2].chip_out,
+							      0, "htcpld-core", GPIO_ACTIVE_HIGH,
+							      GPIOD_OUT_LOW);
+	if (!htcpld->int_reset_gpio_lo)
+		/*
+		 * If it failed, that sucks, but we can probably
+		 * continue on without it.
+		 */
+		dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
 
 	dev_info(dev, "Initialized successfully\n");
 	return 0;
diff --git a/include/linux/htcpld.h b/include/linux/htcpld.h
index 842fce69ac06..5f8ac9b1d724 100644
--- a/include/linux/htcpld.h
+++ b/include/linux/htcpld.h
@@ -13,8 +13,6 @@ struct htcpld_chip_platform_data {
 };
 
 struct htcpld_core_platform_data {
-	unsigned int                      int_reset_gpio_hi;
-	unsigned int                      int_reset_gpio_lo;
 	unsigned int                      i2c_adapter_id;
 
 	struct htcpld_chip_platform_data  *chip;
-- 
2.37.2