Re: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement

[Bartosz Golaszewski]

On Tue, Aug 9, 2022 at 3:48 PM Francesco Dolcini
<francesco.dolcini@xxxxxxxxxxx> wrote:
>
> Hello Bartosz, can you pick this? Patches 1 and 2 were applied to MFD
> tree.
>
> On Tue, Jul 12, 2022 at 06:33:43PM +0200, Francesco Dolcini wrote:
> > STMPE driver does not require a specific node name anymore, only the
> > compatible is checked, update binding according to this.
> >
> > Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/gpio/gpio-stmpe.txt | 3 +--
> >  1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> > index a0e4cf885213..b33f8f02c0d7 100644
> > --- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> > +++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> > @@ -8,8 +8,7 @@ Optional properties:
> >   - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
> >     due to different usage (e.g. touch, keypad)
> >
> > -Node name must be stmpe_gpio and should be child node of stmpe node to which it
> > -belongs.
> > +Node should be child node of stmpe node to which it belongs.
> >
> >  Example:
> >       stmpe_gpio {
> > --
> > 2.25.1
> >
>

Sorry, I was off most of August and missed this one. Now applied.

Bart