Re: [PATCH RESEND 2/6] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

[Vignesh Raghavendra]

On 10/08/22 15:09, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju@xxxxxx>
> 
> Add dt node for the single instance of WIZ (SERDES wrapper) and
> SERDES module shared by PCIe, eDP and USB.
> 
> Cc: Vignesh Raghavendra <vigneshr@xxxxxx>
> Cc: Nishanth Menon <nm@xxxxxx>
> Acked-by: Matt Ranostay <mranostay@xxxxxx>
> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 70 ++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index f7e359da8690..f1e02d896168 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -5,6 +5,13 @@
>   * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
>   */
>  
> +/ {
> +	serdes_refclk: serdes-refclk {

clk-X

> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +	};
> +};
> +
>  &cbass_main {
>  	msmc_ram: sram@70000000 {
>  		compatible = "mmio-sram";
> @@ -33,6 +40,13 @@ scm_conf: scm-conf@104000 {
>  		#size-cells = <1>;
>  		ranges = <0x00 0x00 0x00104000 0x18000>;
>  
> +		serdes_ln_ctrl: mux-controller@80 {

mux-controller-X

> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
> +					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
> +		};
> +
>  		usb_serdes_mux: mux-controller@0 {
>  			compatible = "mmio-mux";
>  			#mux-control-cells = <1>;
> @@ -728,6 +742,62 @@ usb0: usb@6000000 {
>  		};
>  	};
>  
> +	serdes_wiz0: wiz@5060000 {
> +		compatible = "ti,j721e-wiz-10g";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>;
> +		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
> +		num-lanes = <4>;
> +		#reset-cells = <1>;
> +		ranges = <0x5060000 0x0 0x5060000 0x10000>;
> +
> +		assigned-clocks = <&k3_clks 365 3>;
> +		assigned-clock-parents = <&k3_clks 365 7>;
> +
> +		wiz0_pll0_refclk: pll0-refclk {

please use generic node name clk-X here and elsewhere in the patch

> +			clocks = <&k3_clks 365 3>, <&serdes_refclk>;
> +			clock-output-names = "wiz0_pll0_refclk";
> +			#clock-cells = <0>;
> +			assigned-clocks = <&wiz0_pll0_refclk>;
> +			assigned-clock-parents = <&k3_clks 365 3>;
> +		};
> +
> +		wiz0_pll1_refclk: pll1-refclk {

ditto

> +			clocks = <&k3_clks 365 3>, <&serdes_refclk>;
> +			clock-output-names = "wiz0_pll1_refclk";
> +			#clock-cells = <0>;
> +			assigned-clocks = <&wiz0_pll1_refclk>;
> +			assigned-clock-parents = <&k3_clks 365 3>;
> +		};
> +
> +		wiz0_refclk_dig: refclk-dig {

ditto

> +			clocks = <&k3_clks 365 3>, <&serdes_refclk>;
> +			clock-output-names = "wiz0_refclk_dig";
> +			#clock-cells = <0>;
> +			assigned-clocks = <&wiz0_refclk_dig>;
> +			assigned-clock-parents = <&k3_clks 365 3>;
> +		};
> +
> +		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {

ditto

> +			clocks = <&wiz0_refclk_dig>;
> +			#clock-cells = <0>;
> +		};
> +
> +		serdes0: serdes@5060000 {
> +			compatible = "ti,j721e-serdes-10g";
> +			reg = <0x05060000 0x00010000>;
> +			reg-names = "torrent_phy";
> +			resets = <&serdes_wiz0 0>;
> +			reset-names = "torrent_reset";
> +			clocks = <&wiz0_pll0_refclk>;
> +			clock-names = "refclk";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +	};
> +
>  	main_mcan0: can@2701000 {
>  		compatible = "bosch,m_can";
>  		reg = <0x00 0x02701000 0x00 0x200>,

-- 
Regards
Vignesh