[PATCH v2] ARM: dts: lan966x: add led configuration

[Horatiu Vultur]

Add led configuration for pcb8291 and pcb8309. Both pcbs have 4 leds which
are connected to the sgpio controller.

Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
v1->v2:
- remove status from the leds node as default is okay
---
 arch/arm/boot/dts/lan966x-pcb8291.dts | 28 +++++++++++++++++++++++++++
 arch/arm/boot/dts/lan966x-pcb8309.dts | 28 +++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index 24d9055c4a08..289a31649422 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -23,6 +23,34 @@ gpio-restart {
 		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
 };
 
 &gpio {
diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
index 05ce27ed5648..cfd7c8933703 100644
--- a/arch/arm/boot/dts/lan966x-pcb8309.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
@@ -42,6 +42,34 @@ i2c103: i2c-sfp@2 {
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
 	mux: mux-controller {
 		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
-- 
2.33.0