Re: [PATCH v2 00/41] drm: Analog TV Improvements

[Noralf Trønnes]

Den 01.09.2022 21.35, skrev Noralf Trønnes:
> 
> 
> I have finally found a workaround for my kernel hangs.
> 
> Dom had a look at my kernel and found that the VideoCore was fine, and
> he said this:
> 
>> That suggests cause of lockup was on arm side rather than VC side.
>>
>> But it's hard to diagnose further. Once you've had a peripheral not
>> respond, the AXI bus locks up and no further operations are possible.
>> Usual causes of this are required clocks being stopped or domains
>> disabled and then trying to access the hardware.
>>
> 
> So when I got this on my 64-bit build:
> 
> [  166.702171] SError Interrupt on CPU1, code 0x00000000bf000002 -- SError
> [  166.702187] CPU: 1 PID: 8 Comm: kworker/u8:0 Tainted: G        W
>     5.19.0-rc6-00096-gba7973977976-dirty #1
> [  166.702200] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
> [  166.702206] Workqueue: events_freezable_power_ thermal_zone_device_check
> [  166.702231] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [  166.702242] pc : regmap_mmio_read32le+0x10/0x28
> [  166.702261] lr : regmap_mmio_read+0x44/0x70
> ...
> [  166.702606]  bcm2711_get_temp+0x58/0xb0 [bcm2711_thermal]
> 
> I wondered if that reg read was stalled due to a clock being stopped.
> 
> Lo and behold, disabling runtime pm and keeping the vec clock running
> all the time fixed it[1].
> 
> I don't know what the problem is, but at least I can now test this patchset.
> 
> [1] https://gist.github.com/notro/23b984e7fa05cfbda2db50a421cac065
> 

It turns out I didn't have to disable runtime pm:
https://gist.github.com/notro/0adcfcb12460b54e54458afe11dc8ea2

Noralf.