[PATCH] usb: misc: usb3503: call clk_disable_unprepare in the error handling

[Dongliang Mu]

From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>

Smatch reports the following warning:

vers/usb/misc/usb3503.c:267 usb3503_probe() warn: 'hub->clk'
from clk_prepare_enable() not released on lines: 240,246,252

Fix this by adding a flag to indicate if hub->clk is prepared or not and
invoke clk_disable_unprepare in the error handling.

Signed-off-by: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
---
 drivers/usb/misc/usb3503.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 330f494cd158..add47dd964b2 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -160,6 +160,7 @@ static int usb3503_probe(struct usb3503 *hub)
 	struct usb3503_platform_data *pdata = dev_get_platdata(dev);
 	struct device_node *np = dev->of_node;
 	int err;
+	int is_clk_enable = 0;
 	u32 mode = USB3503_MODE_HUB;
 	const u32 *property;
 	enum gpiod_flags flags;
@@ -217,6 +218,8 @@ static int usb3503_probe(struct usb3503 *hub)
 			return err;
 		}
 
+		// set a flag for successful clk_prepare_enable
+		is_clk_enable = 1;
 		property = of_get_property(np, "disabled-ports", &len);
 		if (property && (len / sizeof(u32)) > 0) {
 			int i;
@@ -236,20 +239,29 @@ static int usb3503_probe(struct usb3503 *hub)
 	else
 		flags = GPIOD_OUT_HIGH;
 	hub->intn = devm_gpiod_get_optional(dev, "intn", flags);
-	if (IS_ERR(hub->intn))
+	if (IS_ERR(hub->intn)) {
+		if (is_clk_enable)
+			clk_disable_unprepare(hub->clk);
 		return PTR_ERR(hub->intn);
+	}
 	if (hub->intn)
 		gpiod_set_consumer_name(hub->intn, "usb3503 intn");
 
 	hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW);
-	if (IS_ERR(hub->connect))
+	if (IS_ERR(hub->connect)) {
+		if (is_clk_enable)
+			clk_disable_unprepare(hub->clk);
 		return PTR_ERR(hub->connect);
+	}
 	if (hub->connect)
 		gpiod_set_consumer_name(hub->connect, "usb3503 connect");
 
 	hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(hub->reset))
+	if (IS_ERR(hub->reset)) {
+		if (is_clk_enable)
+			clk_disable_unprepare(hub->clk);
 		return PTR_ERR(hub->reset);
+	}
 	if (hub->reset) {
 		/* Datasheet defines a hardware reset to be at least 100us */
 		usleep_range(100, 10000);
-- 
2.25.1