Hello Thomas,
Thanks for your feedback and comments.
On 9/5/22 12:41, Thomas Zimmermann wrote:
Hi Javier
Am 28.08.22 um 17:11 schrieb Javier Martinez Canillas:
The simple display pipeline is a set of helpers that can be used by DRM
drivers to avoid dealing with all the needed components and just define
a few functions to operate a simple display device with one full-screen
scanout buffer feeding a single output.
But it is arguable that this provides the correct level of abstraction
for simple drivers, and recently some have been ported from using these
simple display helpers to use the regular atomic helpers instead.
The rationale for this is that the simple display pipeline helpers don't
hide that much of the DRM complexity, while adding an indirection layer
that conflates the concepts of CRTCs and planes. This makes the helpers
less flexible and harder to be reused among different graphics drivers.
Also, for simple drivers, using the full atomic helpers doesn't require
a lot of additional code. So adding a simple display pipeline layer may
not be worth it.
For these reasons, let's follow that trend and make ssd130x a plain DRM
driver that creates its own primary plane, CRTC, enconder and connector.
Thanks for considering this change.
You are welcome and thanks to you for mentioning this to me. After doing
this I'm convinced as well that the simple-KMS / simple display pipeline
abstraction doesn't add any value and we should just drop it in favor of
the full atomic helpers.
Suggested-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Acked-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Thanks!
There are a few questions below.
[...]
+static void ssd130x_primary_plane_helper_atomic_update(struct drm_plane *plane,
+ struct drm_atomic_state *old_state)
{
- struct ssd130x_device *ssd130x = drm_to_ssd130x(pipe->crtc.dev);
+ struct drm_plane_state *plane_state = plane->state;
+ struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(old_state, plane);
struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
- struct drm_device *drm = &ssd130x->drm;
- int idx, ret;
+ struct drm_framebuffer *fb = plane_state->fb;
+ struct drm_device *drm = plane->dev;
+ struct drm_rect src_clip, dst_clip;
+ int idx;
- ret = ssd130x_power_on(ssd130x);
- if (ret)
+ if (!fb)
I know that some other drivers do this check. But from reading
drm_atomic_helper.c, it shouldn't be necesary. If !fb, the plane has
been disabled. And because there's an implementation of atomic_disable,
the helpers should never call atomic_update on disabled planes. I think
the test can be removed.
Yes, I just added because noticed that others drivers did. I'll drop it
when posting a v2.
[...]
+static void ssd130x_encoder_helper_atomic_enable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
+{
+ struct drm_device *drm = encoder->dev;
+ struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
+ int ret;
+
+ ret = ssd130x_power_on(ssd130x);
+ if (ret)
return;
- ssd130x_fb_blit_rect(plane_state->fb, &shadow_plane_state->data[0], &dst_clip);
+ ret = ssd130x_init(ssd130x);
+ if (ret)
+ return ssd130x_power_off(ssd130x);
It returns a value from a function returning 'void'?
Right. I'll fix it in v2 as well.
Is this function the correct place for ssd130x_init() ? It looks a bit
heavy for a simple enable operation.
Yes, I was abusing the concept of encoder here just to have a place where
I could hook the enable / disable logic, since I was looking at the other
DRM objects helper operations structures and found that these were only
defined for the encoder.
But there is technically no encoder on this device. As you can see, I was
using DRM_MODE_ENCODER_NONE when the encoder is initialized.
But I notice now that the struct drm_crtc_helper_funcs also have .enable
and .disable callbacks, it seems I was just blind and didn't see before.
Would having the init and poweroff logic in the CRTC helpers be correct
to you or was do you have in mind ?
Best regards
Thomas
Attachment:
OpenPGP_signature
Description: OpenPGP digital signature