[PATCH 5.10 57/80] usb: dwc2: fix wrong order of phy_power_on and phy_init

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@xxxxxxxxx>

commit f9b995b49a07bd0d43b0e490f59be84415c745ae upstream.

Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().

Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c")
Cc: stable@xxxxxxxxxxxxxxx
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
Acked-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/dwc2/platform.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -154,9 +154,9 @@ static int __dwc2_lowlevel_hw_enable(str
 	} else if (hsotg->plat && hsotg->plat->phy_init) {
 		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 	} else {
-		ret = phy_power_on(hsotg->phy);
+		ret = phy_init(hsotg->phy);
 		if (ret == 0)
-			ret = phy_init(hsotg->phy);
+			ret = phy_power_on(hsotg->phy);
 	}
 
 	return ret;
@@ -188,9 +188,9 @@ static int __dwc2_lowlevel_hw_disable(st
 	} else if (hsotg->plat && hsotg->plat->phy_exit) {
 		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 	} else {
-		ret = phy_exit(hsotg->phy);
+		ret = phy_power_off(hsotg->phy);
 		if (ret == 0)
-			ret = phy_power_off(hsotg->phy);
+			ret = phy_exit(hsotg->phy);
 	}
 	if (ret)
 		return ret;