Re: [PATCH v9 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings

[Tanmay Shah]

Hello maintainers,

I have received reviews on driver patch (6/6) of this series.

Just following up on reviews of bindings patch.

I am not sure why it shows as pending reviews here: 
https://patchwork.ozlabs.org/project/devicetree-bindings/list/?page=2

If anything is missing, I can fix in next revision along with other fixes.

Thanks.


On 7/7/22 6:39 PM, Tanmay Shah wrote:
> From: Tanmay Shah <tanmay.shah@xxxxxxxxxx>
>
> Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
> Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
> (cluster).
>
> Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxxxxx>
> Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
> ---
>
> Changes in v9:
>    - remove power-domains property description
>    - fix nitpicks in description of other properties
>
> Changes in v8:
>    - Add 'items:' for sram property
>
> Changes in v7:
>    - Add minItems in sram property
>
> Changes in v6:
>    - Add maxItems to sram and memory-region property
>
> Changes in v5:
> - Add constraints of the possible values of xlnx,cluster-mode property
> - fix description of power-domains property for r5 core
> - Remove reg, address-cells and size-cells properties as it is not required
> - Fix description of mboxes property
> - Add description of each memory-region and remove old .txt binding link
>    reference in the description
>
> Changes in v4:
>    - Add memory-region, mboxes and mbox-names properties in example
>
> Changes in v3:
>    - None
>
>   .../bindings/remoteproc/xlnx,r5f-rproc.yaml   | 135 ++++++++++++++++++
>   include/dt-bindings/power/xlnx-zynqmp-power.h |   6 +
>   2 files changed, 141 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> new file mode 100644
> index 000000000000..56b4dd1d5088
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx R5F processor subsystem
> +
> +maintainers:
> +  - Ben Levinsky <ben.levinsky@xxxxxxxxxx>
> +  - Tanmay Shah <tanmay.shah@xxxxxxxxxx>
> +
> +description: |
> +  The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
> +  real-time processing based on the Cortex-R5F processor core from ARM.
> +  The Cortex-R5F processor implements the Arm v7-R architecture and includes a
> +  floating-point unit that implements the Arm VFPv3 instruction set.
> +
> +properties:
> +  compatible:
> +    const: xlnx,zynqmp-r5fss
> +
> +  xlnx,cluster-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2]
> +    description: |
> +      The RPU MPCore can operate in split mode (Dual-processor performance), Safety
> +      lock-step mode(Both RPU cores execute the same code in lock-step,
> +      clock-for-clock) or Single CPU mode (RPU core 0 is held in reset while
> +      core 1 runs normally). The processor does not support dynamic configuration.
> +      Switching between modes is only permitted immediately after a processor reset.
> +      If set to  1 then lockstep mode and if 0 then split mode.
> +      If set to  2 then single CPU mode. When not defined, default will be lockstep mode.
> +      In summary,
> +      0: split mode
> +      1: lockstep mode (default)
> +      2: single cpu mode
> +
> +patternProperties:
> +  "^r5f-[a-f0-9]+$":
> +    type: object
> +    description: |
> +      The RPU is located in the Low Power Domain of the Processor Subsystem.
> +      Each processor includes separate L1 instruction and data caches and
> +      tightly coupled memories (TCM). System memory is cacheable, but the TCM
> +      memory space is non-cacheable.
> +
> +      Each RPU contains one 64KB memory and two 32KB memories that
> +      are accessed via the TCM A and B port interfaces, for a total of 128KB
> +      per processor. In lock-step mode, the processor has access to 256KB of
> +      TCM memory.
> +
> +    properties:
> +      compatible:
> +        const: xlnx,zynqmp-r5f
> +
> +      power-domains:
> +        maxItems: 1
> +
> +      mboxes:
> +        minItems: 1
> +        items:
> +          - description: mailbox channel to send data to RPU
> +          - description: mailbox channel to receive data from RPU
> +
> +      mbox-names:
> +        minItems: 1
> +        items:
> +          - const: tx
> +          - const: rx
> +
> +      sram:
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        minItems: 1
> +        maxItems: 8
> +        items:
> +          maxItems: 1
> +        description: |
> +          phandles to one or more reserved on-chip SRAM regions. Other than TCM,
> +          the RPU can execute instructions and access data from the OCM memory,
> +          the main DDR memory, and other system memories.
> +
> +          The regions should be defined as child nodes of the respective SRAM
> +          node, and should be defined as per the generic bindings in
> +          Documentation/devicetree/bindings/sram/sram.yaml
> +
> +      memory-region:
> +        description: |
> +          List of phandles to the reserved memory regions associated with the
> +          remoteproc device. This is variable and describes the memories shared with
> +          the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
> +          vrings, ...). This reserved memory region will be allocated in DDR memory.
> +        minItems: 1
> +        maxItems: 8
> +        items:
> +          - description: region used for RPU firmware image section
> +          - description: vdev buffer
> +          - description: vring0
> +          - description: vring1
> +        additionalItems: true
> +
> +    required:
> +      - compatible
> +      - power-domains
> +
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    r5fss: r5fss {
> +        compatible = "xlnx,zynqmp-r5fss";
> +        xlnx,cluster-mode = <1>;
> +
> +        r5f-0 {
> +            compatible = "xlnx,zynqmp-r5f";
> +            power-domains = <&zynqmp_firmware 0x7>;
> +            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> +            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> +            mbox-names = "tx", "rx";
> +        };
> +
> +        r5f-1 {
> +            compatible = "xlnx,zynqmp-r5f";
> +            power-domains = <&zynqmp_firmware 0x8>;
> +            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> +            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> +            mbox-names = "tx", "rx";
> +        };
> +    };
> +...
> diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
> index 0d9a412fd5e0..618024cbb20d 100644
> --- a/include/dt-bindings/power/xlnx-zynqmp-power.h
> +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
> @@ -6,6 +6,12 @@
>   #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
>   #define _DT_BINDINGS_ZYNQMP_POWER_H
>   
> +#define		PD_RPU_0	7
> +#define		PD_RPU_1	8
> +#define		PD_R5_0_ATCM	15
> +#define		PD_R5_0_BTCM	16
> +#define		PD_R5_1_ATCM	17
> +#define		PD_R5_1_BTCM	18
>   #define		PD_USB_0	22
>   #define		PD_USB_1	23
>   #define		PD_TTC_0	24