[PATCH 1/4] dt-bindings: net: qcom,ethqos: Convert bindings to yaml

[Bhupesh Sharma]

Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.

Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: David Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 .../devicetree/bindings/net/qcom,ethqos.txt   |  66 ---------
 .../devicetree/bindings/net/qcom,ethqos.yaml  | 139 ++++++++++++++++++
 2 files changed, 139 insertions(+), 66 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.txt
 create mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.yaml

diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
deleted file mode 100644
index 1f5746849a71..000000000000
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Qualcomm Ethernet ETHQOS device
-
-This documents dwmmac based ethernet device which supports Gigabit
-ethernet for version v2.3.0 onwards.
-
-This device has following properties:
-
-Required properties:
-
-- compatible: Should be one of:
-		"qcom,qcs404-ethqos"
-		"qcom,sm8150-ethqos"
-
-- reg: Address and length of the register set for the device
-
-- reg-names: Should contain register names "stmmaceth", "rgmii"
-
-- clocks: Should contain phandle to clocks
-
-- clock-names: Should contain clock names "stmmaceth", "pclk",
-		"ptp_ref", "rgmii"
-
-- interrupts: Should contain phandle to interrupts
-
-- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
-
-Rest of the properties are defined in stmmac.txt file in same directory
-
-
-Example:
-
-ethernet: ethernet@7a80000 {
-	compatible = "qcom,qcs404-ethqos";
-	reg = <0x07a80000 0x10000>,
-		<0x07a96000 0x100>;
-	reg-names = "stmmaceth", "rgmii";
-	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
-	clocks = <&gcc GCC_ETH_AXI_CLK>,
-		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
-		<&gcc GCC_ETH_PTP_CLK>,
-		<&gcc GCC_ETH_RGMII_CLK>;
-	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq", "eth_lpi";
-	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-
-	snps,txpbl = <8>;
-	snps,rxpbl = <2>;
-	snps,aal;
-	snps,tso;
-
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
-
-	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "snps,dwmac-mdio";
-		phy1: phy@4 {
-			device_type = "ethernet-phy";
-			reg = <0x4>;
-		};
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
new file mode 100644
index 000000000000..f05df9b0d106
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ethernet ETHQOS device
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
+
+description:
+  This binding describes the dwmmac based Qualcomm ethernet devices which
+  support Gigabit ethernet (version v2.3.0 onwards).
+
+  So, this file documents platform glue layer for dwmmac stmmac based Qualcomm
+  ethernet devices.
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-ethqos
+      - qcom,sm8150-ethqos
+
+  reg: true
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: stmmaceth
+      - const: rgmii
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - const: rgmii
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  mdio: true
+
+  phy-handle: true
+
+  phy-mode: true
+
+  snps,reset-gpio: true
+
+  snps,tso:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables the TSO feature otherwise it will be managed by MAC HW capability register.
+
+  power-domains: true
+
+  resets: true
+
+  rx-fifo-depth: true
+
+  tx-fifo-depth: true
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet1: ethernet@20000 {
+      compatible = "qcom,sm8150-ethqos";
+      reg = <0x0 0x00020000 0x0 0x10000>,
+            <0x0 0x00036000 0x0 0x100>;
+      reg-names = "stmmaceth", "rgmii";
+      clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+      clocks = <&gcc GCC_EMAC_AXI_CLK>,
+               <&gcc GCC_EMAC_SLV_AHB_CLK>,
+               <&gcc GCC_EMAC_PTP_CLK>,
+               <&gcc GCC_EMAC_RGMII_CLK>;
+      interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi";
+
+      power-domains = <&gcc EMAC_GDSC>;
+      resets = <&gcc GCC_EMAC_BCR>;
+      iommus = <&apps_smmu 0x3C0 0x0>;
+
+      snps,tso;
+      rx-fifo-depth = <4096>;
+      tx-fifo-depth = <4096>;
+
+      snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+      snps,reset-active-low;
+      snps,reset-delays-us = <0 11000 70000>;
+
+      snps,mtl-rx-config = <&mtl_rx_setup>;
+      snps,mtl-tx-config = <&mtl_tx_setup>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&ethernet_defaults>;
+
+      phy-handle = <&rgmii_phy>;
+      phy-mode = "rgmii";
+      max-speed = <1000>;
+
+      mdio {
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        compatible = "snps,dwmac-mdio";
+        rgmii_phy: phy@7 {
+          reg = <0x7>;
+          interrupt-parent = <&tlmm>;
+          interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
+          device_type = "ethernet-phy";
+          compatible = "ethernet-phy-ieee802.3-c22";
+        };
+      };
+    };
-- 
2.37.1