Re: [RFC PATCH 0/7] RDMA/rxe: On-Demand Paging on SoftRoCE

[Zhu Yanjun]

On Wed, Sep 7, 2022 at 10:44 AM Daisuke Matsuda
<matsuda-daisuke@xxxxxxxxxxx> wrote:
>
> Hi everyone,
>
> This patch series implements the On-Demand Paging feature on SoftRoCE(rxe)
> driver, which has been available only in mlx5 driver[1] so far.
>
> [Overview]
> When applications register a memory region(MR), RDMA drivers normally pin
> pages in the MR so that physical addresses are never changed during RDMA
> communication. This requires the MR to fit in physical memory and
> inevitably leads to memory pressure. On the other hand, On-Demand Paging
> (ODP) allows applications to register MRs without pinning pages. They are
> paged-in when the driver requires and paged-out when the OS reclaims. As a
> result, it is possible to register a large MR that does not fit in physical
> memory without taking up so much physical memory.
>
> [Why to add this feature?]
> We, Fujitsu, have contributed to RDMA with a view to using it with
> persistent memory. Persistent memory can host a filesystem that allows
> applications to read/write files directly without involving page cache.
> This is called FS-DAX(filesystem direct access) mode. There is a problem
> that data on DAX-enabled filesystem cannot be duplicated with software RAID
> or other hardware methods. Data replication with RDMA, which features
> high-speed connections, is the best solution for the problem.
>
> However, there is a known issue that hinders using RDMA with FS-DAX. When
> RDMA operations to a file and update of the file metadata are processed
> concurrently on the same node, illegal memory accesses can be executed,
> disregarding the updated metadata. This is because RDMA operations do not
> go through page cache but access data directly. There was an effort[2] to
> solve this problem, but it was rejected in the end. Though there is no
> general solution available, it is possible to work around the problem using
> the ODP feature that has been available only in mlx5. ODP enables drivers
> to update metadata before processing RDMA operations.
>
> We have enhanced the rxe to expedite the usage of persistent memory. Our
> contribution to rxe includes RDMA Atomic write[3] and RDMA Flush[4]. With
> them being merged to rxe along with ODP, an environment will be ready for
> developers to create and test software for RDMA with FS-DAX. There is a
> library(librpma)[5] being developed for this purpose. This environment
> can be used by anybody without any special hardware but an ordinary
> computer with a normal NIC though it is inferior to hardware
> implementations in terms of performance.
>
> [Design considerations]
> ODP has been available only in mlx5, but functions and data structures
> that can be used commonly are provided in ib_uverbs(infiniband/core). The
> interface is heavily dependent on HMM infrastructure[6], and this patchset
> use them as much as possible. While mlx5 has both Explicit and Implicit ODP
> features along with prefetch feature, this patchset implements the Explicit
> ODP feature only.
>
> As an important change, it is necessary to convert triple tasklets
> (requester, responder and completer) to workqueues because they must be
> able to sleep in order to trigger page fault before accessing MRs. I did a
> test shown in the 2nd patch and found that the change makes the latency
> higher while improving the bandwidth. Though it may be possible to create a
> new independent workqueue for page fault execution, it is a not very
> sensible solution since the tasklets have to busy-wait its completion in
> that case.
>
> If responder and completer sleep, it becomes more likely that packet drop
> occurs because of overflow in receiver queue. There are multiple queues
> involved, but, as SoftRoCE uses UDP, the most important one would be the
> UDP buffers. The size can be configured in net.core.rmem_default and
> net.core.rmem_max sysconfig parameters. Users should change these values in
> case of packet drop, but page fault would be typically not so long as to
> cause the problem.
>
> [How does ODP work?]
> "struct ib_umem_odp" is used to manage pages. It is created for each
> ODP-enabled MR on its registration. This struct holds a pair of arrays
> (dma_list/pfn_list) that serve as a driver page table. DMA addresses and
> PFNs are stored in the driver page table. They are updated on page-in and
> page-out, both of which use the common interface in ib_uverbs.
>
> Page-in can occur when requester, responder or completer access an MR in
> order to process RDMA operations. If they find that the pages being
> accessed are not present on physical memory or requisite permissions are
> not set on the pages, they provoke page fault to make pages present with
> proper permissions and at the same time update the driver page table. After
> confirming the presence of the pages, they execute memory access such as
> read, write or atomic operations.
>
> Page-out is triggered by page reclaim or filesystem events (e.g. metadata
> update of a file that is being used as an MR). When creating an ODP-enabled
> MR, the driver registers an MMU notifier callback. When the kernel issues a
> page invalidation notification, the callback is provoked to unmap DMA
> addresses and update the driver page table. After that, the kernel releases
> the pages.
>
> [Supported operations]
> All operations are supported on RC connection. Atomic write[3] and Flush[4]
> operations, which are still under discussion, are also going to be
> supported after their patches are merged. On UD connection, Send, Recv,
> SRQ-Recv are supported. Because other operations are not supported on mlx5,
> I take after the decision right now.
>
> [How to test ODP?]
> There are only a few resources available for testing. pyverbs testcases in
> rdma-core and perftest[7] are recommendable ones. Note that you may have to
> build perftest from upstream since older versions do not handle ODP
> capabilities correctly.

ibv_rc_pingpong can also test the odp feature.

Please add rxe odp test cases in rdma-core.

Thanks a lot.
Zhu Yanjun

>
> [Future work]
> My next work will be the prefetch feature. It allows applications to
> trigger page fault using ibv_advise_mr(3) to optimize performance. Some
> existing software like librpma use this feature. Additionally, I think we
> can also add the implicit ODP feature in the future.
>
> [1] [RFC 00/20] On demand paging
> https://www.spinics.net/lists/linux-rdma/msg18906.html
>
> [2] [RFC PATCH v2 00/19] RDMA/FS DAX truncate proposal V1,000,002 ;-)
> https://lore.kernel.org/nvdimm/20190809225833.6657-1-ira.weiny@xxxxxxxxx/
>
> [3] [RESEND PATCH v5 0/2] RDMA/rxe: Add RDMA Atomic Write operation
> https://www.spinics.net/lists/linux-rdma/msg111428.html
>
> [4] [PATCH v4 0/6] RDMA/rxe: Add RDMA FLUSH operation
> https://www.spinics.net/lists/kernel/msg4462045.html
>
> [5] librpma: Remote Persistent Memory Access Library
> https://github.com/pmem/rpma
>
> [6] Heterogeneous Memory Management (HMM)
> https://www.kernel.org/doc/html/latest/mm/hmm.html
>
> [7] linux-rdma/perftest: Infiniband Verbs Performance Tests
> https://github.com/linux-rdma/perftest
>
> Daisuke Matsuda (7):
>   IB/mlx5: Change ib_umem_odp_map_dma_single_page() to retain umem_mutex
>   RDMA/rxe: Convert the triple tasklets to workqueues
>   RDMA/rxe: Cleanup code for responder Atomic operations
>   RDMA/rxe: Add page invalidation support
>   RDMA/rxe: Allow registering MRs for On-Demand Paging
>   RDMA/rxe: Add support for Send/Recv/Write/Read operations with ODP
>   RDMA/rxe: Add support for the traditional Atomic operations with ODP
>
>  drivers/infiniband/core/umem_odp.c    |   6 +-
>  drivers/infiniband/hw/mlx5/odp.c      |   4 +-
>  drivers/infiniband/sw/rxe/Makefile    |   5 +-
>  drivers/infiniband/sw/rxe/rxe.c       |  18 ++
>  drivers/infiniband/sw/rxe/rxe_comp.c  |  42 +++-
>  drivers/infiniband/sw/rxe/rxe_loc.h   |  11 +-
>  drivers/infiniband/sw/rxe/rxe_mr.c    |   7 +-
>  drivers/infiniband/sw/rxe/rxe_net.c   |   4 +-
>  drivers/infiniband/sw/rxe/rxe_odp.c   | 329 ++++++++++++++++++++++++++
>  drivers/infiniband/sw/rxe/rxe_param.h |   2 +-
>  drivers/infiniband/sw/rxe/rxe_qp.c    |  68 +++---
>  drivers/infiniband/sw/rxe/rxe_recv.c  |   2 +-
>  drivers/infiniband/sw/rxe/rxe_req.c   |  14 +-
>  drivers/infiniband/sw/rxe/rxe_resp.c  | 175 +++++++-------
>  drivers/infiniband/sw/rxe/rxe_resp.h  |  44 ++++
>  drivers/infiniband/sw/rxe/rxe_task.c  | 152 ------------
>  drivers/infiniband/sw/rxe/rxe_task.h  |  69 ------
>  drivers/infiniband/sw/rxe/rxe_verbs.c |  16 +-
>  drivers/infiniband/sw/rxe/rxe_verbs.h |  10 +-
>  drivers/infiniband/sw/rxe/rxe_wq.c    | 161 +++++++++++++
>  drivers/infiniband/sw/rxe/rxe_wq.h    |  71 ++++++
>  21 files changed, 824 insertions(+), 386 deletions(-)
>  create mode 100644 drivers/infiniband/sw/rxe/rxe_odp.c
>  create mode 100644 drivers/infiniband/sw/rxe/rxe_resp.h
>  delete mode 100644 drivers/infiniband/sw/rxe/rxe_task.c
>  delete mode 100644 drivers/infiniband/sw/rxe/rxe_task.h
>  create mode 100644 drivers/infiniband/sw/rxe/rxe_wq.c
>  create mode 100644 drivers/infiniband/sw/rxe/rxe_wq.h
>
> --
> 2.31.1
>