Re: [PATCH 3/4 v2] dt-bindings: memory: Add jedec,lpddr4 and jedec,lpddr5 bindings

[Rob Herring]

On Wed, 07 Sep 2022 16:29:13 -0700, Julius Werner wrote:
> This patch adds bindings for LPDDR4 and LPDDR5 memory analogous to the
> existing bindings for LPDDR2 and LPDDR3. For now, the new types are only
> needed for topology description, so other properties like timing
> parameters are omitted. They can be added later if needed.
> 
> Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx>
> ---
>  .../ddr/jedec,lpddr-props.yaml                |  4 ++
>  .../memory-controllers/ddr/jedec,lpddr4.yaml  | 36 ++++++++++++++
>  .../memory-controllers/ddr/jedec,lpddr5.yaml  | 47 +++++++++++++++++++
>  3 files changed, 87 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
> 
> Changelog:
> 
> - v2
>   - removed minItems
>   - moved `$ref` below `maintainers`
>   - renamed example node from `lpddr4` to `lpddr`
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.example.dtb: lpddr: Unevaluated properties are not allowed ('manufacturer-id' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.example.dtb: lpddr: Unevaluated properties are not allowed ('manufacturer-id' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.