Re: [PATCH 1/4] dt-bindings: net: qcom,ethqos: Convert bindings to yaml

[Krzysztof Kozlowski]

On 07/09/2022 22:49, Bhupesh Sharma wrote:
> Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
> 
> Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: David Miller <davem@xxxxxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>

Thank you for your patch. There is something to discuss/improve.

> ---
>  .../devicetree/bindings/net/qcom,ethqos.txt   |  66 ---------
>  .../devicetree/bindings/net/qcom,ethqos.yaml  | 139 ++++++++++++++++++

You need to update maintainers - old path.

>  2 files changed, 139 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.txt
>  create mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
> deleted file mode 100644
> index 1f5746849a71..000000000000
> --- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -Qualcomm Ethernet ETHQOS device
> -
> -This documents dwmmac based ethernet device which supports Gigabit
> -ethernet for version v2.3.0 onwards.
> -
> -This device has following properties:
> -
> -Required properties:
> -
> -- compatible: Should be one of:
> -		"qcom,qcs404-ethqos"
> -		"qcom,sm8150-ethqos"
> -
> -- reg: Address and length of the register set for the device
> -
> -- reg-names: Should contain register names "stmmaceth", "rgmii"
> -
> -- clocks: Should contain phandle to clocks
> -
> -- clock-names: Should contain clock names "stmmaceth", "pclk",
> -		"ptp_ref", "rgmii"
> -
> -- interrupts: Should contain phandle to interrupts
> -
> -- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
> -
> -Rest of the properties are defined in stmmac.txt file in same directory
> -
> -
> -Example:
> -
> -ethernet: ethernet@7a80000 {
> -	compatible = "qcom,qcs404-ethqos";
> -	reg = <0x07a80000 0x10000>,
> -		<0x07a96000 0x100>;
> -	reg-names = "stmmaceth", "rgmii";
> -	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
> -	clocks = <&gcc GCC_ETH_AXI_CLK>,
> -		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
> -		<&gcc GCC_ETH_PTP_CLK>,
> -		<&gcc GCC_ETH_RGMII_CLK>;
> -	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> -			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> -	interrupt-names = "macirq", "eth_lpi";
> -	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
> -	snps,reset-active-low;
> -
> -	snps,txpbl = <8>;
> -	snps,rxpbl = <2>;
> -	snps,aal;
> -	snps,tso;
> -
> -	phy-handle = <&phy1>;
> -	phy-mode = "rgmii";
> -
> -	mdio {
> -		#address-cells = <0x1>;
> -		#size-cells = <0x0>;
> -		compatible = "snps,dwmac-mdio";
> -		phy1: phy@4 {
> -			device_type = "ethernet-phy";
> -			reg = <0x4>;
> -		};
> -	};
> -
> -};
> diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
> new file mode 100644
> index 000000000000..f05df9b0d106
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
> @@ -0,0 +1,139 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Ethernet ETHQOS device
> +
> +maintainers:
> +  - Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> +
> +description:
> +  This binding describes the dwmmac based Qualcomm ethernet devices which
> +  support Gigabit ethernet (version v2.3.0 onwards).
> +
> +  So, this file documents platform glue layer for dwmmac stmmac based Qualcomm
> +  ethernet devices.
> +
> +allOf:
> +  - $ref: "snps,dwmac.yaml#"

No need for quotes.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,qcs404-ethqos
> +      - qcom,sm8150-ethqos
> +
> +  reg: true

I think both devices use two reg spaces.

> +
> +  reg-names:
> +    minItems: 1

Why allowing only one item?

> +    items:
> +      - const: stmmaceth
> +      - const: rgmii
> +
> +  interrupts: true

This should be specific/fixed.

> +
> +  interrupt-names: true

This should be specific/fixed.


> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 4

Why such flexibility?

> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: stmmaceth
> +      - const: pclk
> +      - const: ptp_ref
> +      - const: rgmii
> +
> +  iommus:
> +    minItems: 1
> +    maxItems: 2

Aren't we using only one MMU?

> +
> +  mdio: true
> +
> +  phy-handle: true
> +
> +  phy-mode: true
> +
> +  snps,reset-gpio: true
> +
> +  snps,tso:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Enables the TSO feature otherwise it will be managed by MAC HW capability register.
> +
> +  power-domains: true
> +
> +  resets: true
> +
> +  rx-fifo-depth: true
> +
> +  tx-fifo-depth: true

You do not list all these properties, because you use
unevaluatedProperties. Drop all of these "xxx :true".
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names


Best regards,
Krzysztof