[PATCH v5 07/21] dt-bindings: hwmon: (mr75203) add description for Moortec's PVT controller
From: Eliav Farber
Date: Thu Sep 08 2022 - 11:25:33 EST
This changes adds a detailed description for the mr75203 controller and
for some of the analog IPs controlled by it.
Signed-off-by: Eliav Farber <farbere@xxxxxxxxxx>
---
V4 -> V3:
- New patch to add description.
.../bindings/hwmon/moortec,mr75203.yaml | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index 8ea97e774364..5e41aed5891a 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -9,6 +9,32 @@ title: Moortec Semiconductor MR75203 PVT Controller bindings
maintainers:
- Rahul Tanwar <rtanwar@xxxxxxxxxxxxx>
+description: |
+ A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+ include many different units.
+ Such a design will usually consists of several Moortec's embedded analog IPs,
+ and a single Moortec controller (mr75203) to configure and control the IPs.
+
+ Some of the Moortec's analog hard IPs that can be used in a design:
+ *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+ *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+ *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+ *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+ based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+ oscillator at 1.8V).
+ *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+ be presented for VM for measurement within its range (e.g. mr76006 -
+ divide by 2 pre-scaler).
+
+ TS, VM & PD also include a digital interface, which consists of configuration
+ inputs and measurement outputs.
+
+ Some of the units have number of series, each series can have slightly
+ different characteristics.
+
+ The mr75203 binding describes configuration for the controller unit, but also
+ for some of the analog IPs.
+
properties:
compatible:
const: moortec,mr75203
--
2.37.1