Re: [PATCH 1/2] drm/panel-edp: Fix delays for Innolux N116BCA-EA1
From: Doug Anderson
Date: Thu Sep 08 2022 - 11:36:23 EST
On Thu, Sep 8, 2022 at 1:55 AM Chen-Yu Tsai <wenst@xxxxxxxxxxxx> wrote:
> Commit 52824ca4502d ("drm/panel-edp: Better describe eDP panel delays")
> clarified the various delays used for eDP panels, tying them to the eDP
> panel timing diagram.
> For Innolux N116BCA-EA1, .prepare_to_enable would be:
> t4_min + t5_min + t6_min + max(t7_max, t8_min)
> Since t4_min and t5_min are both 0, the panel can use either .enable or
> As .enable is better defined, switch to using .enable for this panel.
> Also add .disable = 50, based on the datasheet's t9_min value. This
> effectively makes the delays the same as delay_200_500_e80_d50.
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Fixes: 51d35631c970 ("drm/panel-simple: Add N116BCA-EA1")
> Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> drivers/gpu/drm/panel/panel-edp.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Yup, this looks like a good fix to me. Thanks! I guess that patch
you're fixing was from a time before I had analyzed the eDP panel
delays quite so closely.
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Given how non-controversial these types of patches are, I typically
just apply them right away so I'll do that shortly. If this upsets
anyone then please shout and I'll change my behavior. ;-)
I've applied this one to drm-misc-fixes.
8f7115c1923c drm/panel-edp: Fix delays for Innolux N116BCA-EA1