[PATCH v6 0/5] PCI: qcom: Add system suspend & resume support

[Krishna chaitanya chundru]

Add suspend and resume syscore ops.

When system suspends, and if the link is in L1ss, disable the clocks
and power down the phy so that system enters into low power state by
parking link in L1ss to save the maximum power. And when the system
resumes, enable the clocks back and power on phy if they are disabled
in the suspend path.

we are doing this only when link is in l1ss but not in L2/L3 as
nowhere we are forcing link to L2/L3 by sending PME turn off.

is_suspended flag indicates if the clocks are disabled in the suspend
path or not.

There is access to Ep PCIe space to mask MSI/MSIX after pm suspend ops
(getting hit by affinity changes while making CPUs offline during suspend,
this will happen after devices are suspended (all phases of suspend ops)).
When registered with pm ops there is a crash due to un-clocked access,
as in the pm suspend op clocks are disabled. So, registering with syscore
ops which will called after making CPUs offline.

Make GDSC always on to ensure controller and its dependent clocks
won't go down during system suspend.

Krishna chaitanya chundru (5):
  PCI: qcom: Add system suspend and resume support
  PCI: qcom: Add retry logic for link to be stable in L1ss
  phy: core: Add support for phy power down & power up
  phy: qcom: Add power down/up callbacks to pcie phy
  clk: qcom: Alwaya on pcie gdsc

 drivers/clk/qcom/gcc-sc7280.c            |   2 +-
 drivers/pci/controller/dwc/pcie-qcom.c   | 156 ++++++++++++++++++++++++++++++-
 drivers/phy/phy-core.c                   |  30 ++++++
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c |  50 ++++++++++
 include/linux/phy/phy.h                  |  20 ++++
 5 files changed, 256 insertions(+), 2 deletions(-)

-- 
2.7.4