[PATCH v2 05/10] x86/Kconfig: move all X86_EXTENDED_PLATFORM options together

[Mateusz Jończyk]

so that these options will be displayed together in menuconfig etc.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@xxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: x86@xxxxxxxxxx
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
---
 arch/x86/Kconfig | 50 ++++++++++++++++++++++++------------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 28f0c32fc65a..5a0bde075cae 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -642,6 +642,31 @@ config X86_INTEL_QUARK
 	  Say Y here if you have a Quark based system such as the Arduino
 	  compatible Intel Galileo.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	depends on X86_EXTENDED_PLATFORM
+	select M486
+	select X86_REBOOTFIXUPS
+	help
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
+config STA2X11
+	bool "STA2X11 Companion Chip Support"
+	depends on X86_32 && SMP
+	depends on X86_EXTENDED_PLATFORM && PCI
+	select SWIOTLB
+	select MFD_STA2X11
+	select GPIOLIB
+	help
+	  This adds support for boards based on the STA2X11 IO-Hub,
+	  a.k.a. "ConneXt". The chip is used in place of the standard
+	  PC chipset, so all "standard" peripherals are missing. If this
+	  option is selected the kernel will still be able to boot on
+	  standard PC machines.
+
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
 	depends on X86 && ACPI && PCI
@@ -695,17 +720,6 @@ config IOSF_MBI_DEBUG
 
 	  If you don't require the option or are in doubt, say N.
 
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	depends on X86_EXTENDED_PLATFORM
-	select M486
-	select X86_REBOOTFIXUPS
-	help
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
-
 config X86_SUPPORTS_MEMORY_FAILURE
 	def_bool y
 	# MCE code calls memory_failure():
@@ -715,20 +729,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 
-config STA2X11
-	bool "STA2X11 Companion Chip Support"
-	depends on X86_32 && SMP
-	depends on X86_EXTENDED_PLATFORM && PCI
-	select SWIOTLB
-	select MFD_STA2X11
-	select GPIOLIB
-	help
-	  This adds support for boards based on the STA2X11 IO-Hub,
-	  a.k.a. "ConneXt". The chip is used in place of the standard
-	  PC chipset, so all "standard" peripherals are missing. If this
-	  option is selected the kernel will still be able to boot on
-	  standard PC machines.
-
 config X86_32_IRIS
 	tristate "Eurobraille/Iris poweroff module"
 	depends on X86_32
-- 
2.25.1