[PATCH] PCI: tegra: Update comment about config space

[Pali Rohár]

Like many other ARM PCIe controllers, it uses old PCI Configuration
Mechanism #1 from PCI Local Bus for accessing PCI config space.
It is not PCIe ECAM in any case.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
---
 drivers/pci/controller/pci-tegra.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 8e323e93be91..5df90d183526 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -395,9 +395,11 @@ static inline u32 pads_readl(struct tegra_pcie *pcie, unsigned long offset)
 }
 
 /*
- * The configuration space mapping on Tegra is somewhat similar to the ECAM
- * defined by PCIe. However it deviates a bit in how the 4 bits for extended
- * register accesses are mapped:
+ * The configuration space mapping on Tegra is somewhat similar to the Intel
+ * PCI Configuration Mechanism #1 as defined in PCI Local Bus Specification.
+ * But it is mapped directly into physical address space as opposite of the
+ * CF8/CFC indirect access, bit 31 (enable) is unset and reserved bits [27:24]
+ * are used to access extended PCIe config space registers.
  *
  *    [27:24] extended register number
  *    [23:16] bus number
-- 
2.20.1