[PATCH v2] MIPS: Loongson32: Fix PHY-mode being left unspecified

[Kelvin Cheung]

From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>

commit 0060c8783330 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.

Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
Tested-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
---
V1 -> V2: Add my SoB tag
---
 arch/mips/loongson32/common/platform.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 794c96c2a4cd..311dc1580bbd 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 	if (plat_dat->bus_id) {
 		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
 			     GMAC1_USE_UART0, LS1X_MUX_CTRL0);
-		switch (plat_dat->interface) {
+		switch (plat_dat->phy_interface) {
 		case PHY_INTERFACE_MODE_RGMII:
 			val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
 			break;
@@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 			break;
 		default:
 			pr_err("unsupported mii mode %d\n",
-			       plat_dat->interface);
+			       plat_dat->phy_interface);
 			return -ENOTSUPP;
 		}
 		val &= ~GMAC1_SHUT;
 	} else {
-		switch (plat_dat->interface) {
+		switch (plat_dat->phy_interface) {
 		case PHY_INTERFACE_MODE_RGMII:
 			val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
 			break;
@@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 			break;
 		default:
 			pr_err("unsupported mii mode %d\n",
-			       plat_dat->interface);
+			       plat_dat->phy_interface);
 			return -ENOTSUPP;
 		}
 		val &= ~GMAC0_SHUT;
@@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 	plat_dat = dev_get_platdata(&pdev->dev);
 
 	val &= ~PHY_INTF_SELI;
-	if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
 		val |= 0x4 << PHY_INTF_SELI_SHIFT;
 	__raw_writel(val, LS1X_MUX_CTRL1);
 
@@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = {
 	.bus_id			= 0,
 	.phy_addr		= -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
-	.interface		= PHY_INTERFACE_MODE_MII,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
-	.interface		= PHY_INTERFACE_MODE_RMII,
+	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 #endif
 	.mdio_bus_data		= &ls1x_mdio_bus_data,
 	.dma_cfg		= &ls1x_eth_dma_cfg,
@@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = {
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
 	.bus_id			= 1,
 	.phy_addr		= -1,
-	.interface		= PHY_INTERFACE_MODE_MII,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
 	.mdio_bus_data		= &ls1x_mdio_bus_data,
 	.dma_cfg		= &ls1x_eth_dma_cfg,
 	.has_gmac		= 1,

base-commit: 727488e305b223ca69205ca5a3b99ace21bbbf5f
-- 
2.34.1