[RFC v1 net-next 8/8] net: dsa: ocelot: add external ocelot switch control
From: Colin Foster
Date: Sun Sep 11 2022 - 16:03:52 EST
Add control of an external VSC7512 chip by way of the ocelot-mfd interface.
Currently the four copper phy ports are fully functional. Communication to
external phys is also functional, but the SGMII / QSGMII interfaces are
currently non-functional.
Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
---
v1 from previous RFC:
* Remove unnecessary byteorder and kconfig header includes.
* Create OCELOT_EXT_PORT_MODE_SERDES macro to match vsc9959.
* Utilize readx_poll_timeout for SYS_RESET_CFG_MEM_INIT.
* *_io_res struct arrays have been moved to the MFD files.
* Changes to utilize phylink_generic_validate() have been squashed.
* dev_err_probe() is used in the probe function.
* Make ocelot_ext_switch_of_match static.
* Relocate ocelot_ext_ops structure to be next to vsc7512_info, to
match what was done in other felix drivers.
* Utilize dev_get_regmap() instead of the obsolete
ocelot_init_regmap_from_resource() routine.
---
drivers/mfd/ocelot-core.c | 3 +
drivers/net/dsa/ocelot/Kconfig | 14 ++
drivers/net/dsa/ocelot/Makefile | 5 +
drivers/net/dsa/ocelot/ocelot_ext.c | 254 ++++++++++++++++++++++++++++
include/soc/mscc/ocelot.h | 2 +
5 files changed, 278 insertions(+)
create mode 100644 drivers/net/dsa/ocelot/ocelot_ext.c
diff --git a/drivers/mfd/ocelot-core.c b/drivers/mfd/ocelot-core.c
index aa7fa21b354c..b7b9f6855f74 100644
--- a/drivers/mfd/ocelot-core.c
+++ b/drivers/mfd/ocelot-core.c
@@ -188,6 +188,9 @@ static const struct mfd_cell vsc7512_devs[] = {
.use_of_reg = true,
.num_resources = ARRAY_SIZE(vsc7512_miim1_resources),
.resources = vsc7512_miim1_resources,
+ }, {
+ .name = "ocelot-ext-switch",
+ .of_compatible = "mscc,vsc7512-ext-switch",
},
};
diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
index 08db9cf76818..d8b224f8dc97 100644
--- a/drivers/net/dsa/ocelot/Kconfig
+++ b/drivers/net/dsa/ocelot/Kconfig
@@ -1,4 +1,18 @@
# SPDX-License-Identifier: GPL-2.0-only
+config NET_DSA_MSCC_OCELOT_EXT
+ tristate "Ocelot External Ethernet switch support"
+ depends on NET_DSA && SPI
+ depends on NET_VENDOR_MICROSEMI
+ select MDIO_MSCC_MIIM
+ select MFD_OCELOT_CORE
+ select MSCC_OCELOT_SWITCH_LIB
+ select NET_DSA_TAG_OCELOT_8021Q
+ select NET_DSA_TAG_OCELOT
+ help
+ This driver supports the VSC7511, VSC7512, VSC7513 and VSC7514 chips
+ when controlled through SPI. It can be used with the Microsemi dev
+ boards and an external CPU or custom hardware.
+
config NET_DSA_MSCC_FELIX
tristate "Ocelot / Felix Ethernet switch support"
depends on NET_DSA && PCI
diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
index f6dd131e7491..d7f3f5a4461c 100644
--- a/drivers/net/dsa/ocelot/Makefile
+++ b/drivers/net/dsa/ocelot/Makefile
@@ -1,11 +1,16 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
+obj-$(CONFIG_NET_DSA_MSCC_OCELOT_EXT) += mscc_ocelot_ext.o
obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
mscc_felix-objs := \
felix.o \
felix_vsc9959.o
+mscc_ocelot_ext-objs := \
+ felix.o \
+ ocelot_ext.o
+
mscc_seville-objs := \
felix.o \
seville_vsc9953.o
diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
new file mode 100644
index 000000000000..c821cc963787
--- /dev/null
+++ b/drivers/net/dsa/ocelot/ocelot_ext.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021-2022 Innovative Advantage Inc.
+ */
+
+#include <linux/iopoll.h>
+#include <linux/mfd/ocelot.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <soc/mscc/ocelot_ana.h>
+#include <soc/mscc/ocelot_dev.h>
+#include <soc/mscc/ocelot_qsys.h>
+#include <soc/mscc/ocelot_vcap.h>
+#include <soc/mscc/ocelot_ptp.h>
+#include <soc/mscc/ocelot_sys.h>
+#include <soc/mscc/ocelot.h>
+#include <soc/mscc/vsc7514_regs.h>
+#include "felix.h"
+
+#define VSC7512_NUM_PORTS 11
+
+#define OCELOT_EXT_MEM_INIT_SLEEP_US 1000
+#define OCELOT_EXT_MEM_INIT_TIMEOUT_US 100000
+
+#define OCELOT_EXT_PORT_MODE_SERDES (OCELOT_PORT_MODE_SGMII | \
+ OCELOT_PORT_MODE_QSGMII)
+
+static const u32 vsc7512_port_modes[VSC7512_NUM_PORTS] = {
+ OCELOT_PORT_MODE_INTERNAL,
+ OCELOT_PORT_MODE_INTERNAL,
+ OCELOT_PORT_MODE_INTERNAL,
+ OCELOT_PORT_MODE_INTERNAL,
+ OCELOT_EXT_PORT_MODE_SERDES,
+ OCELOT_EXT_PORT_MODE_SERDES,
+ OCELOT_EXT_PORT_MODE_SERDES,
+ OCELOT_EXT_PORT_MODE_SERDES,
+ OCELOT_EXT_PORT_MODE_SERDES,
+ OCELOT_EXT_PORT_MODE_SERDES,
+ OCELOT_PORT_MODE_SGMII,
+ OCELOT_EXT_PORT_MODE_SERDES,
+};
+
+static const u32 vsc7512_gcb_regmap[] = {
+ REG(GCB_SOFT_RST, 0x0008),
+ REG(GCB_MIIM_MII_STATUS, 0x009c),
+ REG(GCB_PHY_PHY_CFG, 0x00f0),
+ REG(GCB_PHY_PHY_STAT, 0x00f4),
+};
+
+static const u32 *vsc7512_regmap[TARGET_MAX] = {
+ [ANA] = vsc7514_ana_regmap,
+ [QS] = vsc7514_qs_regmap,
+ [QSYS] = vsc7514_qsys_regmap,
+ [REW] = vsc7514_rew_regmap,
+ [SYS] = vsc7514_sys_regmap,
+ [S0] = vsc7514_vcap_regmap,
+ [S1] = vsc7514_vcap_regmap,
+ [S2] = vsc7514_vcap_regmap,
+ [PTP] = vsc7514_ptp_regmap,
+ [GCB] = vsc7512_gcb_regmap,
+ [DEV_GMII] = vsc7514_dev_gmii_regmap,
+};
+
+static void ocelot_ext_reset_phys(struct ocelot *ocelot)
+{
+ ocelot_write(ocelot, 0, GCB_PHY_PHY_CFG);
+ ocelot_write(ocelot, 0x1ff, GCB_PHY_PHY_CFG);
+ mdelay(500);
+}
+
+static int ocelot_ext_mem_init_status(struct ocelot *ocelot)
+{
+ int val, err;
+
+ err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], &val);
+
+ return err ?: val;
+}
+
+static int ocelot_ext_reset(struct ocelot *ocelot)
+{
+ int err, val;
+
+ ocelot_ext_reset_phys(ocelot);
+
+ /* Initialize chip memories */
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
+ if (err)
+ return err;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
+ if (err)
+ return err;
+
+ /* MEM_INIT is a self-clearing bit. Wait for it to be clear (should be
+ * 100us) before enabling the switch core
+ */
+ err = readx_poll_timeout(ocelot_ext_mem_init_status, ocelot, val, !val,
+ OCELOT_EXT_MEM_INIT_SLEEP_US,
+ OCELOT_EXT_MEM_INIT_TIMEOUT_US);
+
+ if (IS_ERR_VALUE(err))
+ return err;
+
+ return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
+}
+
+static void ocelot_ext_phylink_validate(struct ocelot *ocelot, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ struct felix *felix = ocelot_to_felix(ocelot);
+ struct dsa_switch *ds = felix->ds;
+ struct phylink_config *pl_config;
+ struct dsa_port *dp;
+
+ dp = dsa_to_port(ds, port);
+ pl_config = &dp->pl_config;
+
+ phylink_generic_validate(pl_config, supported, state);
+}
+
+static struct regmap *ocelot_ext_regmap_init(struct ocelot *ocelot,
+ struct resource *res)
+{
+ return dev_get_regmap(ocelot->dev->parent, res->name);
+}
+
+static const struct ocelot_ops ocelot_ext_ops = {
+ .reset = ocelot_ext_reset,
+ .wm_enc = ocelot_wm_enc,
+ .wm_dec = ocelot_wm_dec,
+ .wm_stat = ocelot_wm_stat,
+ .port_to_netdev = felix_port_to_netdev,
+ .netdev_to_port = felix_netdev_to_port,
+};
+
+static const struct felix_info vsc7512_info = {
+ .target_io_res = vsc7512_target_io_res,
+ .port_io_res = vsc7512_port_io_res,
+ .regfields = vsc7514_regfields,
+ .map = vsc7512_regmap,
+ .ops = &ocelot_ext_ops,
+ .stats_layout = vsc7514_stats_layout,
+ .vcap = vsc7514_vcap_props,
+ .num_mact_rows = 1024,
+ .num_ports = VSC7512_NUM_PORTS,
+ .num_tx_queues = OCELOT_NUM_TC,
+ .phylink_validate = ocelot_ext_phylink_validate,
+ .port_modes = vsc7512_port_modes,
+ .init_regmap = ocelot_ext_regmap_init,
+};
+
+static int ocelot_ext_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dsa_switch *ds;
+ struct ocelot *ocelot;
+ struct felix *felix;
+ int err;
+
+ felix = kzalloc(sizeof(*felix), GFP_KERNEL);
+ if (!felix)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, felix);
+
+ ocelot = &felix->ocelot;
+ ocelot->dev = dev;
+
+ ocelot->num_flooding_pgids = 1;
+
+ felix->info = &vsc7512_info;
+
+ ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+ if (!ds) {
+ err = -ENOMEM;
+ dev_err_probe(dev, err, "Failed to allocate DSA switch\n");
+ goto err_free_felix;
+ }
+
+ ds->dev = dev;
+ ds->num_ports = felix->info->num_ports;
+ ds->num_tx_queues = felix->info->num_tx_queues;
+
+ ds->ops = &felix_switch_ops;
+ ds->priv = ocelot;
+ felix->ds = ds;
+ felix->tag_proto = DSA_TAG_PROTO_OCELOT;
+
+ err = dsa_register_switch(ds);
+ if (err) {
+ dev_err_probe(dev, err, "Failed to register DSA switch\n");
+ goto err_free_ds;
+ }
+
+ return 0;
+
+err_free_ds:
+ kfree(ds);
+err_free_felix:
+ kfree(felix);
+ return err;
+}
+
+static int ocelot_ext_remove(struct platform_device *pdev)
+{
+ struct felix *felix = dev_get_drvdata(&pdev->dev);
+
+ if (!felix)
+ return 0;
+
+ dsa_unregister_switch(felix->ds);
+
+ kfree(felix->ds);
+ kfree(felix);
+
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ return 0;
+}
+
+static void ocelot_ext_shutdown(struct platform_device *pdev)
+{
+ struct felix *felix = dev_get_drvdata(&pdev->dev);
+
+ if (!felix)
+ return;
+
+ dsa_switch_shutdown(felix->ds);
+
+ dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static const struct of_device_id ocelot_ext_switch_of_match[] = {
+ { .compatible = "mscc,vsc7512-ext-switch" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ocelot_ext_switch_of_match);
+
+static struct platform_driver ocelot_ext_switch_driver = {
+ .driver = {
+ .name = "ocelot-ext-switch",
+ .of_match_table = of_match_ptr(ocelot_ext_switch_of_match),
+ },
+ .probe = ocelot_ext_probe,
+ .remove = ocelot_ext_remove,
+ .shutdown = ocelot_ext_shutdown,
+};
+module_platform_driver(ocelot_ext_switch_driver);
+
+MODULE_DESCRIPTION("External Ocelot Switch driver");
+MODULE_LICENSE("GPL");
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 17dd61f36563..2ed38110a6cc 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -460,6 +460,8 @@ enum ocelot_reg {
GCB_MIIM_MII_STATUS,
GCB_MIIM_MII_CMD,
GCB_MIIM_MII_DATA,
+ GCB_PHY_PHY_CFG,
+ GCB_PHY_PHY_STAT,
DEV_CLOCK_CFG = DEV_GMII << TARGET_OFFSET,
DEV_PORT_MISC,
DEV_EVENTS,
--
2.25.1