Re: [PATCH] phy: xilinx: phy-zynqmp: dynamic clock support for power-save

[Michal Simek]

On 9/9/22 15:04, Piyush Mehta wrote:
> Enabling clock for all the lanes, consuming power even PHY is active or
> not.
>
> To resolve the above issue and power saving,made clock enabled/disabled
> based on active PHYs on call of phy_init/phy_exit.
>
> By default clock is disabled for all the lanes. Whenever phy_init called
> from USB, SATA, SGMII, or display driver, it enabled the required clock
> for requested lane. On phy_exit cycle, it disabled clock for the active
> PHYs.
>
> During the suspend/resume cycle, each USB/ SATA/ SGMII/ display driver
> called phy_exit/phy_init individually. it disabled clock on exit, and
> enabled on initialization for the active PHYs.
>
> Active PHY configuration depends on the peripheral DT node status,
> like USB DT node status 'okay' then driver enabled clock for the USB
> configured lane.
>
> Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxx>
> ---
>   drivers/phy/xilinx/phy-zynqmp.c | 59 ++++++++-------------------------
>   1 file changed, 14 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
> index 9be9535ad7ab..912c4defdf8d 100644
> --- a/drivers/phy/xilinx/phy-zynqmp.c
> +++ b/drivers/phy/xilinx/phy-zynqmp.c
> @@ -572,6 +572,10 @@ static int xpsgtr_phy_init(struct phy *phy)
>   
>   	mutex_lock(&gtr_dev->gtr_mutex);
>   
> +	/* Configure and enable the clock when peripheral phy_init call */
> +	if (clk_prepare_enable(gtr_dev->clk[gtr_phy->lane]))
> +		goto out;
> +
>   	/* Skip initialization if not required. */
>   	if (!xpsgtr_phy_init_required(gtr_phy))
>   		goto out;
> @@ -616,9 +620,13 @@ static int xpsgtr_phy_init(struct phy *phy)
>   static int xpsgtr_phy_exit(struct phy *phy)
>   {
>   	struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> +	struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
>   
>   	gtr_phy->skip_phy_init = false;
>   
> +	/* Ensure that disable clock only, which configure for lane */
> +	clk_disable_unprepare(gtr_dev->clk[gtr_phy->lane]);
> +
>   	return 0;
>   }
>   
> @@ -824,15 +832,11 @@ static struct phy *xpsgtr_xlate(struct device *dev,
>   static int __maybe_unused xpsgtr_suspend(struct device *dev)
>   {
>   	struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> -	unsigned int i;
>   
>   	/* Save the snapshot ICM_CFG registers. */
>   	gtr_dev->saved_icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
>   	gtr_dev->saved_icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
>   
> -	for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++)
> -		clk_disable_unprepare(gtr_dev->clk[i]);
> -
>   	return 0;
>   }
>   
> @@ -842,13 +846,6 @@ static int __maybe_unused xpsgtr_resume(struct device *dev)
>   	unsigned int icm_cfg0, icm_cfg1;
>   	unsigned int i;
>   	bool skip_phy_init;
> -	int err;
> -
> -	for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++) {
> -		err = clk_prepare_enable(gtr_dev->clk[i]);
> -		if (err)
> -			goto err_clk_put;
> -	}
>   
>   	icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
>   	icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
> @@ -869,12 +866,6 @@ static int __maybe_unused xpsgtr_resume(struct device *dev)
>   		gtr_dev->phys[i].skip_phy_init = skip_phy_init;
>   
>   	return 0;
> -
> -err_clk_put:
> -	while (i--)
> -		clk_disable_unprepare(gtr_dev->clk[i]);
> -
> -	return err;
>   }
>   
>   static const struct dev_pm_ops xpsgtr_pm_ops = {
> @@ -888,7 +879,6 @@ static const struct dev_pm_ops xpsgtr_pm_ops = {
>   static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
>   {
>   	unsigned int refclk;
> -	int ret;
>   
>   	for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) {
>   		unsigned long rate;
> @@ -899,19 +889,14 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
>   		snprintf(name, sizeof(name), "ref%u", refclk);
>   		clk = devm_clk_get_optional(gtr_dev->dev, name);
>   		if (IS_ERR(clk)) {
> -			ret = dev_err_probe(gtr_dev->dev, PTR_ERR(clk),
> -					    "Failed to get reference clock %u\n",
> -					    refclk);
> -			goto err_clk_put;
> +			return dev_err_probe(gtr_dev->dev, PTR_ERR(clk),
> +					     "Failed to get ref clock %u\n",
> +					     refclk);
>   		}
>   
>   		if (!clk)
>   			continue;
>   
> -		ret = clk_prepare_enable(clk);
> -		if (ret)
> -			goto err_clk_put;
> -
>   		gtr_dev->clk[refclk] = clk;
>   
>   		/*
> @@ -931,18 +916,11 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
>   			dev_err(gtr_dev->dev,
>   				"Invalid rate %lu for reference clock %u\n",
>   				rate, refclk);
> -			ret = -EINVAL;
> -			goto err_clk_put;
> +			return -EINVAL;
>   		}
>   	}
>   
>   	return 0;
> -
> -err_clk_put:
> -	while (refclk--)
> -		clk_disable_unprepare(gtr_dev->clk[refclk]);
> -
> -	return ret;
>   }
>   
>   static int xpsgtr_probe(struct platform_device *pdev)
> @@ -951,7 +929,6 @@ static int xpsgtr_probe(struct platform_device *pdev)
>   	struct xpsgtr_dev *gtr_dev;
>   	struct phy_provider *provider;
>   	unsigned int port;
> -	unsigned int i;
>   	int ret;
>   
>   	gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL);
> @@ -991,8 +968,7 @@ static int xpsgtr_probe(struct platform_device *pdev)
>   		phy = devm_phy_create(&pdev->dev, np, &xpsgtr_phyops);
>   		if (IS_ERR(phy)) {
>   			dev_err(&pdev->dev, "failed to create PHY\n");
> -			ret = PTR_ERR(phy);
> -			goto err_clk_put;
> +			return PTR_ERR(phy);
>   		}
>   
>   		gtr_phy->phy = phy;
> @@ -1003,16 +979,9 @@ static int xpsgtr_probe(struct platform_device *pdev)
>   	provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
>   	if (IS_ERR(provider)) {
>   		dev_err(&pdev->dev, "registering provider failed\n");
> -		ret = PTR_ERR(provider);
> -		goto err_clk_put;
> +		return PTR_ERR(provider);
>   	}
>   	return 0;
> -
> -err_clk_put:
> -	for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++)
> -		clk_disable_unprepare(gtr_dev->clk[i]);
> -
> -	return ret;
>   }
>   
>   static const struct of_device_id xpsgtr_of_match[] = {

Acked-by: Michal Simek <michal.simek@xxxxxxx>

Thanks,
Michal