Re: [PATCH v6 2/5] PCI: qcom: Add retry logic for link to be stable in L1ss

[Krishna Chaitanya Chundru]

On 9/10/2022 1:20 AM, Bjorn Helgaas wrote:
> On Fri, Sep 09, 2022 at 02:14:41PM +0530, Krishna chaitanya chundru wrote:
> > Some specific devices are taking time to settle the link in L1ss.
> > So added a retry logic before returning from the suspend op.
> "L1ss" is not a state.  If you mean "L1.1" or "L1.2", say that.  Also
> in code comments below.
Yes L1ss means L1.2 and L1.2 We will update it next patch
> s/So added a/Add/
>
> What are these specific devices?  Is this a qcom controller defect?
> An endpoint defect that should be addressed via some kind of generic
> quirk?

This is depending up on the endpoint devices and it varies to device to 
device.

We are thinking this is not a defect if there is some traffic in the 
link the link will

not go to L1ss .

> > Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> > ---
> >   drivers/pci/controller/dwc/pcie-qcom.c | 36 +++++++++++++++++++++++-----------
> >   1 file changed, 25 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 6e04d0d..15c2067 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -1809,26 +1809,40 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> >   static int __maybe_unused qcom_pcie_pm_suspend(struct qcom_pcie *pcie)
> >   {
> >   	u32 val;
> > +	ktime_t timeout, start;
> >   	struct dw_pcie *pci = pcie->pci;
> >   	struct device *dev = pci->dev;
> >   
> >   	if (!pcie->cfg->supports_system_suspend)
> >   		return 0;
> >   
> > -	/* if the link is not active turn off clocks */
> > -	if (!dw_pcie_link_up(pci)) {
> > -		dev_info(dev, "Link is not active\n");
> > -		goto suspend;
> > -	}
> > +	start = ktime_get();
> > +	/* Wait max 200 ms */
> > +	timeout = ktime_add_ms(start, 200);
> >   
> > -	/* if the link is not in l1ss don't turn off clocks */
> > -	val = readl(pcie->parf + PCIE20_PARF_PM_STTS);
> > -	if (!(val & PCIE20_PARF_PM_STTS_LINKST_IN_L1SUB)) {
> > -		dev_warn(dev, "Link is not in L1ss\n");
> > -		return 0;
> > +	while (1) {
> > +
> > +		if (!dw_pcie_link_up(pci)) {
> > +			dev_warn(dev, "Link is not active\n");
> > +			break;
> > +		}
> > +
> > +		/* if the link is not in l1ss don't turn off clocks */
> > +		val = readl(pcie->parf + PCIE20_PARF_PM_STTS);
> > +		if ((val & PCIE20_PARF_PM_STTS_LINKST_IN_L1SUB)) {
> > +			dev_dbg(dev, "Link enters L1ss after %d  ms\n",
> > +					ktime_to_ms(ktime_get() - start));
> > +			break;
> > +		}
> > +
> > +		if (ktime_after(ktime_get(), timeout)) {
> > +			dev_warn(dev, "Link is not in L1ss\n");
> > +			return 0;
> > +		}
> > +
> > +		udelay(1000);
> >   	}
> >   
> > -suspend:
> >   	if (pcie->cfg->ops->suspend)
> >   		pcie->cfg->ops->suspend(pcie);
> >   
> > --
> > 2.7.4