[PATCH v2 1/2] thermal: Introduce CONFIG_QCOM_THERMAL in Makefile and qcom/Kconfig

[Bhupesh Sharma]

Introduce CONFIG_QCOM_THERMAL to allow better control
over selection of various Qualcomm Thermal drivers
available inside qcom/ directory.

This is a preparatory change to allow new drivers to
be added inside qcom/ directory in a more structured
fashion later-on.

Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Amit Kucheria <amitk@xxxxxxxxxx>
Cc: Thara Gopinath <thara.gopinath@xxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
- v1 can be viewed here: https://www.spinics.net/lists/kernel/msg4510793.html
- Fixed review comments from Dmitry received in v1.

 drivers/thermal/Makefile     |  2 +-
 drivers/thermal/qcom/Kconfig | 12 ++++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index def8e1a0399c..2506c6c8ca83 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -52,7 +52,7 @@ obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
 obj-y				+= intel/
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-y				+= st/
-obj-$(CONFIG_QCOM_TSENS)	+= qcom/
+obj-y				+= qcom/
 obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
 obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index 2c7f3f9a26eb..ccfd090273c1 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -1,8 +1,17 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+config QCOM_THERMAL
+	tristate "Thermal drivers on Qualcomm Snapdragon series of SoCs"
+	help
+	  Support for thermal drivers on Qualcomm Snapdragon series of SoCs.
+	  There are several thermal sensors available on the Qualcomm Socs
+	  which can be used for thermal mitigation purposes.
+
 config QCOM_TSENS
 	tristate "Qualcomm TSENS Temperature Alarm"
 	depends on NVMEM_QCOM_QFPROM
 	depends on ARCH_QCOM || COMPILE_TEST
+	select QCOM_THERMAL
 	help
 	  This enables the thermal sysfs driver for the TSENS device. It shows
 	  up in Sysfs as a thermal zone with multiple trip points. Disabling the
@@ -15,6 +24,7 @@ config QCOM_SPMI_ADC_TM5
 	depends on OF && SPMI && IIO
 	select REGMAP_SPMI
 	select QCOM_VADC_COMMON
+	select QCOM_THERMAL
 	help
 	  This enables the thermal driver for the ADC thermal monitoring
 	  device. It shows up as a thermal zone with multiple trip points.
@@ -25,6 +35,7 @@ config QCOM_SPMI_TEMP_ALARM
 	tristate "Qualcomm SPMI PMIC Temperature Alarm"
 	depends on OF && SPMI && IIO
 	select REGMAP_SPMI
+	select QCOM_THERMAL
 	help
 	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
 	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
@@ -35,6 +46,7 @@ config QCOM_SPMI_TEMP_ALARM
 config QCOM_LMH
 	tristate "Qualcomm Limits Management Hardware"
 	depends on ARCH_QCOM && QCOM_SCM
+	select QCOM_THERMAL
 	help
 	  This enables initialization of Qualcomm limits management
 	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
-- 
2.37.1