Re: Fragmented physical memory on powerpc/32

From: Pali Rohár
Date: Mon Sep 12 2022 - 17:16:35 EST

Next message: Andrew Lunn: "Re: [RFC Patch net-next 1/4] net: dsa: microchip: determine number of port irq based on switch type"
Previous message: Rob Herring: "Re: [PATCH 3/4] dt-bindings: net: snps,dwmac: Update reg maxitems"
In reply to: Mike Rapoport: "Re: Fragmented physical memory on powerpc/32"
Next in thread: Christophe Leroy: "Re: Fragmented physical memory on powerpc/32"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Monday 12 September 2022 15:48:05 Mike Rapoport wrote:
> On Sat, Sep 10, 2022 at 09:39:20AM +0000, Christophe Leroy wrote:
> > + Adding Mike who might help if the problem is around memblock.
> >
> > Le 08/09/2022 à 22:17, Pali Rohár a écrit :
> > > On Thursday 08 September 2022 17:35:11 Pali Rohár wrote:
> > >> On Thursday 08 September 2022 15:25:14 Christophe Leroy wrote:
> > >>> Le 08/08/2022 à 20:40, Pali Rohár a écrit :
> > >>>> On Friday 10 June 2022 00:24:20 Pali Rohár wrote:
> > >>>>> On Friday 20 May 2022 14:30:02 Pali Rohár wrote:
> > >>>>>> + linux-mm
> > >>>>>>
> > >>>>>> Do you know what are requirements for kernel to support non-contiguous
> > >>>>>> memory support and what is needed to enable it for 32-bit powerpc?
> > >>>>>
> > >>>>> Any hints?
> > >>>>
> > >>>> PING?
> > >>>>
> > >>>
> > >>> The tree following patches landed in powerpc/next branch, so they should
> > >>> soon be visible in linux-next too:
> > >>>
> > >>> fc06755e2562 ("powerpc/32: Drop a stale comment about reservation of
> > >>> gigantic pages")
> > >>> b0e0d68b1c52 ("powerpc/32: Allow fragmented physical memory")
> > >>> 0115953dcebe ("powerpc/32: Remove wii_memory_fixups()")
> > >>
> > >> Ou, nice! I will try to test it if it allows me to access more than 2GB
> > >> of RAM from 4GB DDR3 module with 32-bit addressing mode on P2020 CPU.
> > >
> > > Hello! Ok, I have tried it from powerpc/next branch, but seems it does
> > > not work. I'm getting just early kernel crash.
> > >
> > > [ 0.000000] CPU maps initialized for 1 thread per core
> > > [ 0.000000] (thread shift is 0)
> > > [ 0.000000] -----------------------------------------------------
> > > [ 0.000000] phys_mem_size = 0xbe500000
> > > [ 0.000000] dcache_bsize = 0x20
> > > [ 0.000000] icache_bsize = 0x20
> > > [ 0.000000] cpu_features = 0x0000000010010108
> > > [ 0.000000] possible = 0x0000000010010108
> > > [ 0.000000] always = 0x0000000010010108
> > > [ 0.000000] cpu_user_features = 0x84e08000 0x08000000
> > > [ 0.000000] mmu_features = 0x00020010
> > > [ 0.000000] -----------------------------------------------------
> > > mpc85xx_rdb_setup_arch()
> > > [ 0.000000] ioremap() called early from of_iomap+0x48/0x80. Use early_ioremap() instead
> > > [ 0.000000] MPC85xx RDB board from Freescale Semiconductor
> > > [ 0.000000] barrier-nospec: using isync; sync as speculation barrier
> > > [ 0.000000] barrier-nospec: patched 182 locations
> > > [ 0.000000] Top of RAM: 0xff700000, Total RAM: 0xbe500000
> > > [ 0.000000] Memory hole size: 1042MB
> > > [ 0.000000] Zone ranges:
> > > [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
> > > [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000ff6fffff]
> > > [ 0.000000] Movable zone start for each node
> > > [ 0.000000] Early memory node ranges
> > > [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
> > > [ 0.000000] node 0: [mem 0x00000000c0200000-0x00000000eeffffff]
> > > [ 0.000000] node 0: [mem 0x00000000f0000000-0x00000000ff6fffff]
> > > [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ff6fffff]
> > > [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
> > > [ 0.000000] percpu: Embedded 11 pages/cpu s14196 r8192 d22668 u45056
> > > [ 0.000000] pcpu-alloc: s14196 r8192 d22668 u45056 alloc=11*4096
> > > [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 777792
> > > [ 0.000000] Kernel command line: root=ubi0:rootfs rootfstype=ubifs ubi.mtd=rootfs,2048 rootflags=chk_data_crc rw console=ttyS0,115200
> > > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > > [ 0.000000] Kernel attempted to read user page (7df58) - exploit attempt? (uid: 0)
> > > [ 0.000000] BUG: Unable to handle kernel data access on read at 0x0007df58
> > > [ 0.000000] Faulting instruction address: 0xc01c8348
> > > [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
> > > [ 0.000000] BE PAGE_SIZE=4K SMP NR_CPUS=2 P2020RDB-PC
> > > [ 0.000000] Modules linked in:
> > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc2-0caacb197b677410bdac81bc34f05235+ #121
> > > [ 0.000000] NIP: c01c8348 LR: c01cb2bc CTR: 0000000a
> > > [ 0.000000] REGS: c10d7e20 TRAP: 0300 Not tainted (6.0.0-rc2-0caacb197b677410bdac81bc34f05235+)
> > > [ 0.000000] MSR: 00021000 <CE,ME> CR: 48044224 XER: 00000000
> > > [ 0.000000] DEAR: 0007df58 ESR: 00000000
> > > [ 0.000000] GPR00: c01cb294 c10d7f10 c1045340 00000001 00000004 c112bcc0 00000015 eedf1000
> > > [ 0.000000] GPR08: 00000003 0007df58 00000000 f0000000 28044228 00000200 00000000 00000000
> > > [ 0.000000] GPR16: 00000000 00000000 00000000 0275cb7a c0000000 00000001 0000075f 00000000
> > > [ 0.000000] GPR24: c1031004 00000000 00000000 00000001 c10f0000 eedf1000 00080000 00080000
> > > [ 0.000000] NIP [c01c8348] free_unref_page_prepare.part.93+0x48/0x60
> > > [ 0.000000] LR [c01cb2bc] free_unref_page+0x84/0x4b8
> > > [ 0.000000] Call Trace:
> > > [ 0.000000] [c10d7f10] [eedf1000] 0xeedf1000 (unreliable)
> > > [ 0.000000] [c10d7f20] [c01cb294] free_unref_page+0x5c/0x4b8
> > > [ 0.000000] [c10d7f70] [c1007644] mem_init+0xd0/0x194
> > > [ 0.000000] [c10d7fa0] [c1000e4c] start_kernel+0x4c0/0x6d0
> > > [ 0.000000] [c10d7ff0] [c00003e0] set_ivor+0x13c/0x178
> > > [ 0.000000] Instruction dump:
> > > [ 0.000000] 552817be 5509103a 7d294214 55293830 7d4a4a14 812a003c 814a0038 5529002a
> > > [ 0.000000] 7c892050 5484c23a 5489eafa 548406fe <7d2a482e> 7d242430 5484077e 90870010
> > > [ 0.000000] ---[ end trace 0000000000000000 ]---
> > > [ 0.000000]
> > > [ 0.000000] Kernel panic - not syncing: Fatal exception
> > > [ 0.000000] Rebooting in 1 seconds..
> > > [ 0.000000] System Halted, OK to turn off power
> > >
> > > 4GB DDR3 SODIMM module is set via Freescale LBC to the whole 4 GB
> > > address range. And on ranges:
> > > 0x0000_0000 - 0x7fff_ffff
> > > 0xc020_0000 - 0xeeff_ffff
> > > 0xf000_0000 - 0xff6f_ffff
> > > there is no peripheral device, they are free for DRAM. Between these
> > > physical ranges are mapped peripheral devices (PCIe and NOR).
> > >
> > > Any idea if I'm doing something wrong or there can be a bug in memory code?
> > >
> > > Quite suspicious is that "Initmem setup node 0" prints one range where
> > > are also peripherals, not just DRAM. Crash is on address 0xc01c8348
> > > which belongs to PCIe.
> > >
> >
> > Yes I also find that "Initmem setup node 0" suspicious.
> >
> > However the crash address 0xc01c8348 is valid kernel address. That's a
> > virtual address, not a physical address, so that's not PCIe. That's
> > kernel linear mapping, so that's likely physical address 0x001c8348
> > offseted by PAGE_OFFSET which is 0xc0000000.
>
> If I read the dump correctly, 0xc01c8348 is the PC of the instruction that
> crashed and the access was to 0x0007df58 which seem to well inside
> 0x0000_0000 - 0x7fff_ffff range.

I have tried to read and write memory at address 0x0007df58 in U-Boot
and it works fine without any crash.

I repeated that boot and it always failed with same errors at same
address. I have also tried to use different 4GB DDR module (just in case
if it is non-functional) but it failed on the same error on the same
address.

> And the "Early memory node ranges" look consistent with the memory layout
> above.
>
> My guess would be that something went wrong in the linear map setup, but it
> won't hurt running with "memblock=debug" added to the kernel command line
> to see if there is anything suspicious there.

Here is boot log on serial console with memblock=debug command line:

[ 0.000000] memblock_alloc_try_nid: 8 bytes align=0x4 nid=-1 from=0x00000000 max_addr=0x00000000 smp_setup_cpu_maps+0x40/0x2b4
[ 0.000000] memblock_reserve: [0x2fff5d74-0x2fff5d7b] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] memblock_phys_free: [0x2fff5d74-0x2fff5d7b] setup_arch+0x1bc/0x318
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0xbe500000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x0000000010010108
[ 0.000000] possible = 0x0000000010010108
[ 0.000000] always = 0x0000000010010108
[ 0.000000] cpu_user_features = 0x84e08000 0x08000000
[ 0.000000] mmu_features = 0x00020010
[ 0.000000] -----------------------------------------------------
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2fff2000-0x2fff3fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2fff0000-0x2fff1fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffee000-0x2ffeffff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffec000-0x2ffedfff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffea000-0x2ffebfff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffe8000-0x2ffe9fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffe6000-0x2ffe7fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffe4000-0x2ffe5fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffe2000-0x2ffe3fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8192 bytes align=0x2000 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_stack+0x2c/0x60
[ 0.000000] memblock_reserve: [0x2ffe0000-0x2ffe1fff] memblock_alloc_range_nid+0xe8/0x1b0
mpc85xx_rdb_setup_arch()
[ 0.000000] ioremap() called early from of_iomap+0x48/0x80. Use early_ioremap() instead
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1 from=0x00000000 max_addr=0x00000000 early_pte_alloc_kernel+0x3c/0x90
[ 0.000000] memblock_reserve: [0x2fff4000-0x2fff4fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] MPC85xx RDB board from Freescale Semiconductor
[ 0.000000] barrier-nospec: using isync; sync as speculation barrier
[ 0.000000] barrier-nospec: patched 182 locations
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1 from=0x00000000 max_addr=0x00000000 early_pte_alloc_kernel+0x3c/0x90
[ 0.000000] memblock_reserve: [0x2ffdf000-0x2ffdffff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] Top of RAM: 0xff700000, Total RAM: 0xbe500000
[ 0.000000] Memory hole size: 1042MB
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] HighMem [mem 0x0000000030000000-0x00000000ff6fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x00000000c0200000-0x00000000eeffffff]
[ 0.000000] node 0: [mem 0x00000000f0000000-0x00000000ff6fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ff6fffff]
[ 0.000000] memblock_alloc_try_nid_raw: 37675008 bytes align=0x20 nid=0 from=0x00000000 max_addr=0x00000000 free_area_init+0x890/0xc94
[ 0.000000] memblock_reserve: [0x2dbf1000-0x2ffdefff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 96 bytes align=0x20 nid=0 from=0x00000000 max_addr=0x00000000 setup_usemap+0x60/0xa0
[ 0.000000] memblock_reserve: [0x2fff5d00-0x2fff5d5f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 416 bytes align=0x20 nid=0 from=0x00000000 max_addr=0x00000000 setup_usemap+0x60/0xa0
[ 0.000000] memblock_reserve: [0x2fff5b60-0x2fff5cff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 mmu_context_init+0x38/0x154
[ 0.000000] memblock_reserve: [0x2fff5b40-0x2fff5b5f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 1024 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 mmu_context_init+0x7c/0x154
[ 0.000000] memblock_reserve: [0x2fff5740-0x2fff5b3f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 mmu_context_init+0xc4/0x154
[ 0.000000] memblock_reserve: [0x2fff5720-0x2fff573f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] memblock_alloc_try_nid: 116 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 start_kernel+0x194/0x6d0
[ 0.000000] memblock_reserve: [0x2fff56a0-0x2fff5713] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 116 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 start_kernel+0x1c0/0x6d0
[ 0.000000] memblock_reserve: [0x2fff5620-0x2fff5693] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x314/0x7b4
[ 0.000000] memblock_reserve: [0x2dbf0000-0x2dbf0fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x4d4/0x7b4
[ 0.000000] memblock_reserve: [0x2dbef000-0x2dbeffff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 90112 bytes align=0x1000 nid=-1 from=0x3fffffff max_addr=0x00000000 pcpu_embed_first_chunk+0x564/0x7b4
[ 0.000000] memblock_reserve: [0x2dbd9000-0x2dbeefff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_phys_free: [0x2dbe4000-0x2dbe3fff] pcpu_embed_first_chunk+0x680/0x7b4
[ 0.000000] memblock_phys_free: [0x2dbef000-0x2dbeefff] pcpu_embed_first_chunk+0x680/0x7b4
[ 0.000000] percpu: Embedded 11 pages/cpu s14196 r8192 d22668 u45056
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x37c/0x924
[ 0.000000] memblock_reserve: [0x2fff5d60-0x2fff5d63] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x3a4/0x924
[ 0.000000] memblock_reserve: [0x2fff5600-0x2fff5603] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x3cc/0x924
[ 0.000000] memblock_reserve: [0x2fff55e0-0x2fff55e7] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 8 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x3f4/0x924
[ 0.000000] memblock_reserve: [0x2fff55c0-0x2fff55c7] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] pcpu-alloc: s14196 r8192 d22668 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] memblock_alloc_try_nid: 136 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x7fc/0x924
[ 0.000000] memblock_reserve: [0x2fff5520-0x2fff55a7] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 96 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x64/0x2e0
[ 0.000000] memblock_reserve: [0x2fff54c0-0x2fff551f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 384 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xc4/0x2e0
[ 0.000000] memblock_reserve: [0x2fff5340-0x2fff54bf] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 388 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xf0/0x2e0
[ 0.000000] memblock_reserve: [0x2fff51a0-0x2fff5323] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 96 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x11c/0x2e0
[ 0.000000] memblock_reserve: [0x2fff5140-0x2fff519f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 96 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x64/0x2e0
[ 0.000000] memblock_reserve: [0x2fff50e0-0x2fff513f] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 768 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xc4/0x2e0
[ 0.000000] memblock_reserve: [0x2dbd8d00-0x2dbd8fff] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 772 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xf0/0x2e0
[ 0.000000] memblock_reserve: [0x2dbd89e0-0x2dbd8ce3] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_alloc_try_nid: 192 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x11c/0x2e0
[ 0.000000] memblock_reserve: [0x2fff5020-0x2fff50df] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] memblock_phys_free: [0x2dbf0000-0x2dbf0fff] pcpu_embed_first_chunk+0x744/0x7b4
[ 0.000000] memblock_phys_free: [0x2dbef000-0x2dbeffff] pcpu_embed_first_chunk+0x754/0x7b4
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 777792
[ 0.000000] Kernel command line: root=ubi0:rootfs rootfstype=ubifs ubi.mtd=rootfs,2048 rootflags=chk_data_crc rw console=ttyS0,115200 memblock=debug
[ 0.000000] memblock_alloc_try_nid: 524288 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1a4/0x2ec
[ 0.000000] memblock_reserve: [0x2db589e0-0x2dbd89df] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] memblock_alloc_try_nid: 262144 bytes align=0x20 nid=-1 from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1a4/0x2ec
[ 0.000000] memblock_reserve: [0x2db189e0-0x2db589df] memblock_alloc_range_nid+0xe8/0x1b0
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Kernel attempted to read user page (7df58) - exploit attempt? (uid: 0)
[ 0.000000] BUG: Unable to handle kernel data access on read at 0x0007df58
[ 0.000000] Faulting instruction address: 0xc01c8348
[ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.000000] BE PAGE_SIZE=4K SMP NR_CPUS=2 P2020RDB-PC
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc2-0caacb197b677410bdac81bc34f05235+ #121
[ 0.000000] NIP: c01c8348 LR: c01cb2bc CTR: 0000000a
[ 0.000000] REGS: c10d7e20 TRAP: 0300 Not tainted (6.0.0-rc2-0caacb197b677410bdac81bc34f05235+)
[ 0.000000] MSR: 00021000 <CE,ME> CR: 48044224 XER: 00000000
[ 0.000000] DEAR: 0007df58 ESR: 00000000
[ 0.000000] GPR00: c01cb294 c10d7f10 c1045340 00000001 00000004 c112bcc0 00000015 eedf1000
[ 0.000000] GPR08: 00000003 0007df58 00000000 f0000000 28044228 00000200 00000000 00000000
[ 0.000000] GPR16: 00000000 00000000 00000000 0275cb7a c0000000 00000001 0000075f 00000000
[ 0.000000] GPR24: c1031004 00000000 00000000 00000001 c10f0000 eedf1000 00080000 00080000
[ 0.000000] NIP [c01c8348] free_unref_page_prepare.part.93+0x48/0x60
[ 0.000000] LR [c01cb2bc] free_unref_page+0x84/0x4b8
[ 0.000000] Call Trace:
[ 0.000000] [c10d7f10] [eedf1000] 0xeedf1000 (unreliable)
[ 0.000000] [c10d7f20] [c01cb294] free_unref_page+0x5c/0x4b8
[ 0.000000] [c10d7f70] [c1007644] mem_init+0xd0/0x194
[ 0.000000] [c10d7fa0] [c1000e4c] start_kernel+0x4c0/0x6d0
[ 0.000000] [c10d7ff0] [c00003e0] set_ivor+0x13c/0x178
[ 0.000000] Instruction dump:
[ 0.000000] 552817be 5509103a 7d294214 55293830 7d4a4a14 812a003c 814a0038 5529002a
[ 0.000000] 7c892050 5484c23a 5489eafa 548406fe <7d2a482e> 7d242430 5484077e 90870010
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000]
[ 0.000000] Kernel panic - not syncing: Fatal exception
[ 0.000000] Rebooting in 1 seconds..
[ 0.000000] System Halted, OK to turn off power

Do you need something more for debug?

> > Do you have a way to reproduce this problem under QEMU ?

Well, I really do not know how to run it in QEMU. IIRC QEMU does not
have support for P2020 processor. Is there any guidance?

> > Thanks
> > Christophe
>
> --
> Sincerely yours,
> Mike.

Next message: Andrew Lunn: "Re: [RFC Patch net-next 1/4] net: dsa: microchip: determine number of port irq based on switch type"
Previous message: Rob Herring: "Re: [PATCH 3/4] dt-bindings: net: snps,dwmac: Update reg maxitems"
In reply to: Mike Rapoport: "Re: Fragmented physical memory on powerpc/32"
Next in thread: Christophe Leroy: "Re: Fragmented physical memory on powerpc/32"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]