Re: [PATCH v2 1/2] thermal: Introduce CONFIG_QCOM_THERMAL in Makefile and qcom/Kconfig

[Dmitry Baryshkov]

On 12/09/2022 22:40, Bhupesh Sharma wrote:
> Introduce CONFIG_QCOM_THERMAL to allow better control
> over selection of various Qualcomm Thermal drivers
> available inside qcom/ directory.
>
> This is a preparatory change to allow new drivers to
> be added inside qcom/ directory in a more structured
> fashion later-on.
>
> Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
> Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> Cc: Amit Kucheria <amitk@xxxxxxxxxx>
> Cc: Thara Gopinath <thara.gopinath@xxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
> - v1 can be viewed here: https://www.spinics.net/lists/kernel/msg4510793.html
> - Fixed review comments from Dmitry received in v1.
>
>   drivers/thermal/Makefile     |  2 +-
>   drivers/thermal/qcom/Kconfig | 12 ++++++++++++
>   2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index def8e1a0399c..2506c6c8ca83 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -52,7 +52,7 @@ obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
>   obj-y				+= intel/
>   obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
>   obj-y				+= st/
> -obj-$(CONFIG_QCOM_TSENS)	+= qcom/
> +obj-y				+= qcom/
>   obj-y				+= tegra/
>   obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
>   obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
> index 2c7f3f9a26eb..ccfd090273c1 100644
> --- a/drivers/thermal/qcom/Kconfig
> +++ b/drivers/thermal/qcom/Kconfig
> @@ -1,8 +1,17 @@
>   # SPDX-License-Identifier: GPL-2.0-only
> +
> +config QCOM_THERMAL
> +	tristate "Thermal drivers on Qualcomm Snapdragon series of SoCs"
> +	help
> +	  Support for thermal drivers on Qualcomm Snapdragon series of SoCs.
> +	  There are several thermal sensors available on the Qualcomm Socs
> +	  which can be used for thermal mitigation purposes.
> +
>   config QCOM_TSENS
>   	tristate "Qualcomm TSENS Temperature Alarm"
>   	depends on NVMEM_QCOM_QFPROM
>   	depends on ARCH_QCOM || COMPILE_TEST
> +	select QCOM_THERMAL

What's the point of QCOM_THERMAL if other drivers are `select'ing it? 
I'd have understood if it would be a menuconfig guarding all Qualcomm 
thermal drivers.

>   	help
>   	  This enables the thermal sysfs driver for the TSENS device. It shows
>   	  up in Sysfs as a thermal zone with multiple trip points. Disabling the
> @@ -15,6 +24,7 @@ config QCOM_SPMI_ADC_TM5
>   	depends on OF && SPMI && IIO
>   	select REGMAP_SPMI
>   	select QCOM_VADC_COMMON
> +	select QCOM_THERMAL
>   	help
>   	  This enables the thermal driver for the ADC thermal monitoring
>   	  device. It shows up as a thermal zone with multiple trip points.
> @@ -25,6 +35,7 @@ config QCOM_SPMI_TEMP_ALARM
>   	tristate "Qualcomm SPMI PMIC Temperature Alarm"
>   	depends on OF && SPMI && IIO
>   	select REGMAP_SPMI
> +	select QCOM_THERMAL
>   	help
>   	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
>   	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
> @@ -35,6 +46,7 @@ config QCOM_SPMI_TEMP_ALARM
>   config QCOM_LMH
>   	tristate "Qualcomm Limits Management Hardware"
>   	depends on ARCH_QCOM && QCOM_SCM
> +	select QCOM_THERMAL
>   	help
>   	  This enables initialization of Qualcomm limits management
>   	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on

--
With best wishes
Dmitry