Re: [PATCH next v4 1/2] i2c: hisi: Add initial device tree support

[Yicong Yang]

On 2022/9/13 17:01, chenweilong wrote:
> On 2022/9/13 15:48, Yicong Yang wrote:
>> On 2022/9/9 15:48, Weilong Chen wrote:
>>> The HiSilicon I2C controller can be used on embedded platform, which
>>> boot from devicetree.
>>>
>>> Signed-off-by: Weilong Chen <chenweilong@xxxxxxxxxx>
>>> ---
>>>  drivers/i2c/busses/Kconfig    |  2 +-
>>>  drivers/i2c/busses/i2c-hisi.c | 19 ++++++++++++++++++-
>>>  2 files changed, 19 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>>> index 7284206b278b..6d0fdf48e97d 100644
>>> --- a/drivers/i2c/busses/Kconfig
>>> +++ b/drivers/i2c/busses/Kconfig
>>> @@ -673,7 +673,7 @@ config I2C_HIGHLANDER
>>>  
>>>  config I2C_HISI
>>>  	tristate "HiSilicon I2C controller"
>>> -	depends on (ARM64 && ACPI) || COMPILE_TEST
>>> +	depends on ARM64 || COMPILE_TEST
>>>  	help
>>>  	  Say Y here if you want to have Hisilicon I2C controller support
>>>  	  available on the Kunpeng Server.
>>> diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
>>> index 76c3d8f6fc3c..7a77f306d05f 100644
>>> --- a/drivers/i2c/busses/i2c-hisi.c
>>> +++ b/drivers/i2c/busses/i2c-hisi.c
>>> @@ -5,6 +5,9 @@
>>>   * Copyright (c) 2021 HiSilicon Technologies Co., Ltd.
>>>   */
>>>  
>>> +#ifdef CONFIG_ACPI
>>> +#include <linux/acpi.h>
>>> +#endif
>>>  #include <linux/bits.h>
>>>  #include <linux/bitfield.h>
>>>  #include <linux/completion.h>
>>> @@ -13,6 +16,9 @@
>>>  #include <linux/io.h>
>>>  #include <linux/module.h>
>>>  #include <linux/mod_devicetable.h>
>>> +#ifdef CONFIG_OF
>>> +#include <linux/of.h>
>>> +#endif
>> I don't think the protection for the headers is necessary and common. The
>> ACPI/OF specific functions should have already been handled well with{out}
>> ACPI/OF config. Have you met some problems without these?
>>
>> BTW, it's better to have a changelog when updating the patches.
> 
> This kind usage does exist in the kernel, for example: drivers/rtc/rtc-mc146818-lib.c.
> 

The protection for acpi.h used in that driver may also be unnecessary I think, but may need
test.

> It can be consistent with the protection below MODULE_DEVICE_TABLE.
> 

MODULE_DEVICE_TABLE is defined in module.h, so not depend on these two headers.

>>>  #include <linux/platform_device.h>
>>>  #include <linux/property.h>
>>>  #include <linux/units.h>
>>> @@ -483,17 +489,28 @@ static int hisi_i2c_probe(struct platform_device *pdev)
>>>  	return 0;
>>>  }
>>>  
>>> +#ifdef CONFIG_ACPI
>>>  static const struct acpi_device_id hisi_i2c_acpi_ids[] = {
>>>  	{ "HISI03D1", 0 },
>>>  	{ }
>>>  };
>>>  MODULE_DEVICE_TABLE(acpi, hisi_i2c_acpi_ids);
>>> +#endif
>>> +
>>> +#ifdef CONFIG_OF
>>> +static const struct of_device_id hisi_i2c_dts_ids[] = {
>>> +	{ .compatible = "hisilicon,hisi-i2c", },
>>> +	{ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, hisi_i2c_dts_ids);
>>> +#endif
>>>  
>>>  static struct platform_driver hisi_i2c_driver = {
>>>  	.probe		= hisi_i2c_probe,
>>>  	.driver		= {
>>>  		.name	= "hisi-i2c",
>>> -		.acpi_match_table = hisi_i2c_acpi_ids,
>>> +		.acpi_match_table = ACPI_PTR(hisi_i2c_acpi_ids),
>>> +		.of_match_table = of_match_ptr(hisi_i2c_dts_ids),
>>>  	},
>>>  };
>>>  module_platform_driver(hisi_i2c_driver);
>>>
>> .
> 
> 
> .
>