[PATCH 5.4 053/108] USB: core: Prevent nested device-reset calls

From: Greg Kroah-Hartman
Date: Tue Sep 13 2022 - 11:02:13 EST


From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream.

Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:

============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

...

stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114

This turned out not to be an error in usb-storage but rather a nested
device reset attempt. That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.

Performing a reset as part of disconnect processing is a questionable
practice at best. However, the bug report points out that the USB
core does not have any protection against nested resets. Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.

Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@xxxxxxxxxxxxxx/
Cc: stable@xxxxxxxxxxxxxxx
Reported-and-tested-by: Rondreis <linhaoguo86@xxxxxxxxx>
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/core/hub.c | 10 ++++++++++
include/linux/usb.h | 2 ++
2 files changed, 12 insertions(+)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5923,6 +5923,11 @@ re_enumerate_no_bos:
* the reset is over (using their post_reset method).
*
* Return: The same as for usb_reset_and_verify_device().
+ * However, if a reset is already in progress (for instance, if a
+ * driver doesn't have pre_ or post_reset() callbacks, and while
+ * being unbound or re-bound during the ongoing reset its disconnect()
+ * or probe() routine tries to perform a second, nested reset), the
+ * routine returns -EINPROGRESS.
*
* Note:
* The caller must own the device lock. For example, it's safe to use
@@ -5956,6 +5961,10 @@ int usb_reset_device(struct usb_device *
return -EISDIR;
}

+ if (udev->reset_in_progress)
+ return -EINPROGRESS;
+ udev->reset_in_progress = 1;
+
port_dev = hub->ports[udev->portnum - 1];

/*
@@ -6020,6 +6029,7 @@ int usb_reset_device(struct usb_device *

usb_autosuspend_device(udev);
memalloc_noio_restore(noio_flag);
+ udev->reset_in_progress = 0;
return ret;
}
EXPORT_SYMBOL_GPL(usb_reset_device);
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -580,6 +580,7 @@ struct usb3_lpm_parameters {
* @devaddr: device address, XHCI: assigned by HW, others: same as devnum
* @can_submit: URBs may be submitted
* @persist_enabled: USB_PERSIST enabled for this device
+ * @reset_in_progress: the device is being reset
* @have_langid: whether string_langid is valid
* @authorized: policy has said we can use it;
* (user space) policy determines if we authorize this device to be
@@ -665,6 +666,7 @@ struct usb_device {

unsigned can_submit:1;
unsigned persist_enabled:1;
+ unsigned reset_in_progress:1;
unsigned have_langid:1;
unsigned authorized:1;
unsigned authenticated:1;