[PATCH v7 12/15] drm/msm/disp/dpu: get timing engine status from intf status register

[Vinod Polimera]

Timing gen status can be read reliablly from intf status
register rather than from the timing gen control register,
which will readback as "0" after disable though the timing
gen is still under going disable path. This support was
added from DPU version 5.0.0.

Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  3 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 12 +++++++-----
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c    |  8 +++++++-
 3 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 27f029f..0332cea 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -77,7 +77,8 @@
 
 #define INTF_SC7180_MASK BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE)
 
-#define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
+#define INTF_SC7280_MASK \
+	(INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN) | BIT(DPU_INTF_STATUS_SUPPORTED))
 
 #define IRQ_SDM845_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
 			 BIT(MDP_SSPP_TOP0_INTR2) | \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 38aa38a..21ae3cf 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -203,17 +203,19 @@ enum {
 
 /**
  * INTF sub-blocks
- * @DPU_INTF_INPUT_CTRL         Supports the setting of pp block from which
- *                              pixel data arrives to this INTF
- * @DPU_INTF_TE                 INTF block has TE configuration support
- * @DPU_DATA_HCTL_EN            Allows data to be transferred at different rate
-                                than video timing
+ * @DPU_INTF_INPUT_CTRL             Supports the setting of pp block from which
+ *                                  pixel data arrives to this INTF
+ * @DPU_INTF_TE                     INTF block has TE configuration support
+ * @DPU_DATA_HCTL_EN                Allows data to be transferred at different rate
+				    than video timing
+ * @DPU_INTF_STATUS_SUPPORTED       INTF block has INTF_STATUS register
  * @DPU_INTF_MAX
  */
 enum {
 	DPU_INTF_INPUT_CTRL = 0x1,
 	DPU_INTF_TE,
 	DPU_DATA_HCTL_EN,
+	DPU_INTF_STATUS_SUPPORTED,
 	DPU_INTF_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 7ce66bf..2394473 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -62,6 +62,7 @@
 #define   INTF_LINE_COUNT               0x0B0
 
 #define   INTF_MUX                      0x25C
+#define   INTF_STATUS                   0x26C
 
 #define INTF_CFG_ACTIVE_H_EN	BIT(29)
 #define INTF_CFG_ACTIVE_V_EN	BIT(30)
@@ -297,8 +298,13 @@ static void dpu_hw_intf_get_status(
 		struct intf_status *s)
 {
 	struct dpu_hw_blk_reg_map *c = &intf->hw;
+	unsigned long cap = intf->cap->features;
+
+	if (cap & BIT(DPU_INTF_STATUS_SUPPORTED))
+		s->is_en = BIT(0) & DPU_REG_READ(c, INTF_STATUS);
+	else
+		s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN);
 
-	s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN);
 	s->is_prog_fetch_en = !!(DPU_REG_READ(c, INTF_CONFIG) & BIT(31));
 	if (s->is_en) {
 		s->frame_count = DPU_REG_READ(c, INTF_FRAME_COUNT);
-- 
2.7.4