Re: [Patch net-next 1/5] net: dsa: microchip: determine number of port irq based on switch type

From: Romain Naour
Date: Tue Sep 13 2022 - 16:11:35 EST


Hi,

Le 13/09/2022 à 18:04, Arun Ramadoss a écrit :
> Currently the number of port irqs is hard coded for the lan937x switch
> as 6. In order to make the generic interrupt handler for ksz switches,
> number of port irq supported by the switch is added to the
> ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567.

The ksz9896 has been added recently and it's close to the ksz9897.
So it should get ".port_nirqs = 2" too?

IIUC, to get the number of port irqs you have to look at table "Port Interrupt
Mask Register" in the datasheet.

4 port irqs for the ksz9477: SGMII, PTP, PHY and ACL.
2 port irqs for the ksz9897/ksz9896: PHY and ACL.
3 port irqs for the ksz9567: PTP, PHY and ACL.

Best regards,
Romain

>
> Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> ---
> drivers/net/dsa/microchip/ksz_common.c | 9 +++++++++
> drivers/net/dsa/microchip/ksz_common.h | 1 +
> drivers/net/dsa/microchip/lan937x_main.c | 4 +---
> 3 files changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
> index fcaa71f66322..b91089a483e7 100644
> --- a/drivers/net/dsa/microchip/ksz_common.c
> +++ b/drivers/net/dsa/microchip/ksz_common.c
> @@ -1168,6 +1168,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 16,
> .cpu_ports = 0x7F, /* can be configured as cpu port */
> .port_cnt = 7, /* total physical port count */
> + .port_nirqs = 4,
> .ops = &ksz9477_dev_ops,
> .phy_errata_9477 = true,
> .mib_names = ksz9477_mib_names,
> @@ -1230,6 +1231,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 16,
> .cpu_ports = 0x7F, /* can be configured as cpu port */
> .port_cnt = 7, /* total physical port count */
> + .port_nirqs = 2,
> .ops = &ksz9477_dev_ops,
> .phy_errata_9477 = true,
> .mib_names = ksz9477_mib_names,
> @@ -1259,6 +1261,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 16,
> .cpu_ports = 0x07, /* can be configured as cpu port */
> .port_cnt = 3, /* total port count */
> + .port_nirqs = 2,
> .ops = &ksz9477_dev_ops,
> .mib_names = ksz9477_mib_names,
> .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> @@ -1283,6 +1286,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 16,
> .cpu_ports = 0x7F, /* can be configured as cpu port */
> .port_cnt = 7, /* total physical port count */
> + .port_nirqs = 3,
> .ops = &ksz9477_dev_ops,
> .phy_errata_9477 = true,
> .mib_names = ksz9477_mib_names,
> @@ -1312,6 +1316,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 256,
> .cpu_ports = 0x10, /* can be configured as cpu port */
> .port_cnt = 5, /* total physical port count */
> + .port_nirqs = 6,
> .ops = &lan937x_dev_ops,
> .mib_names = ksz9477_mib_names,
> .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> @@ -1335,6 +1340,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 256,
> .cpu_ports = 0x30, /* can be configured as cpu port */
> .port_cnt = 6, /* total physical port count */
> + .port_nirqs = 6,
> .ops = &lan937x_dev_ops,
> .mib_names = ksz9477_mib_names,
> .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> @@ -1358,6 +1364,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 256,
> .cpu_ports = 0x30, /* can be configured as cpu port */
> .port_cnt = 8, /* total physical port count */
> + .port_nirqs = 6,
> .ops = &lan937x_dev_ops,
> .mib_names = ksz9477_mib_names,
> .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> @@ -1385,6 +1392,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 256,
> .cpu_ports = 0x38, /* can be configured as cpu port */
> .port_cnt = 5, /* total physical port count */
> + .port_nirqs = 6,
> .ops = &lan937x_dev_ops,
> .mib_names = ksz9477_mib_names,
> .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> @@ -1412,6 +1420,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
> .num_statics = 256,
> .cpu_ports = 0x30, /* can be configured as cpu port */
> .port_cnt = 8, /* total physical port count */
> + .port_nirqs = 6,
> .ops = &lan937x_dev_ops,
> .mib_names = ksz9477_mib_names,
> .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
> index 6203dcd8c8f7..baa1e1bc1b7c 100644
> --- a/drivers/net/dsa/microchip/ksz_common.h
> +++ b/drivers/net/dsa/microchip/ksz_common.h
> @@ -45,6 +45,7 @@ struct ksz_chip_data {
> int num_statics;
> int cpu_ports;
> int port_cnt;
> + u8 port_nirqs;
> const struct ksz_dev_ops *ops;
> bool phy_errata_9477;
> bool ksz87xx_eee_link_erratum;
> diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
> index 9b6760b1e572..7136d9c55315 100644
> --- a/drivers/net/dsa/microchip/lan937x_main.c
> +++ b/drivers/net/dsa/microchip/lan937x_main.c
> @@ -20,8 +20,6 @@
> #include "ksz_common.h"
> #include "lan937x.h"
>
> -#define LAN937x_PNIRQS 6
> -
> static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
> {
> return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
> @@ -697,7 +695,7 @@ static int lan937x_pirq_setup(struct ksz_device *dev, u8 p)
> int ret, irq;
> int irq_num;
>
> - port->pirq.nirqs = LAN937x_PNIRQS;
> + port->pirq.nirqs = dev->info->port_nirqs;
> port->pirq.domain = irq_domain_add_simple(dev->dev->of_node,
> port->pirq.nirqs, 0,
> &lan937x_pirq_domain_ops,