[Patch net-next v2 2/5] net: dsa: microchip: enable phy interrupts only if interrupt enabled in dts

[Arun Ramadoss]

In the lan937x_mdio_register function, phy interrupts are enabled
irrespective of irq is enabled in the switch. Now, the check is added to
enable the phy interrupt only if the irq is enabled in the switch.

Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
 drivers/net/dsa/microchip/lan937x_main.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 7136d9c55315..1f4472c90a1f 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -235,15 +235,18 @@ static int lan937x_mdio_register(struct ksz_device *dev)
 
 	ds->slave_mii_bus = bus;
 
-	ret = lan937x_irq_phy_setup(dev);
-	if (ret)
-		return ret;
+	if (dev->irq > 0) {
+		ret = lan937x_irq_phy_setup(dev);
+		if (ret)
+			return ret;
+	}
 
 	ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
 	if (ret) {
 		dev_err(ds->dev, "unable to register MDIO bus %s\n",
 			bus->id);
-		lan937x_irq_phy_free(dev);
+		if (dev->irq > 0)
+			lan937x_irq_phy_free(dev);
 	}
 
 	of_node_put(mdio_np);
-- 
2.36.1