Re: [PATCH v6 6/8] remoteproc: qcom: Add efuse evb selection control

[Sibi Sankar]

On 9/8/22 6:53 PM, Srinivasa Rao Mandadapu wrote:
> Add efuse evb selection control and enable it for starting ADSP.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>

Reviewed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>

> ---
> Changes since V5:
> 	-- Split devm_platform_ioremap_resource_byname function.
>
>   drivers/remoteproc/qcom_q6v5_adsp.c | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 389b2c0..ccb5592 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -56,6 +56,7 @@
>   
>   #define LPASS_BOOT_CORE_START	BIT(0)
>   #define LPASS_BOOT_CMD_START	BIT(0)
> +#define LPASS_EFUSE_Q6SS_EVB_SEL 0x0
>   
>   struct adsp_pil_data {
>   	int crash_reason_smem;
> @@ -86,6 +87,7 @@ struct qcom_adsp {
>   	struct clk_bulk_data *clks;
>   
>   	void __iomem *qdsp6ss_base;
> +	void __iomem *lpass_efuse;
>   
>   	struct reset_control *pdc_sync_reset;
>   	struct reset_control *restart;
> @@ -368,6 +370,9 @@ static int adsp_start(struct rproc *rproc)
>   	/* Program boot address */
>   	writel(adsp->mem_phys >> 4, adsp->qdsp6ss_base + RST_EVB_REG);
>   
> +	if (adsp->lpass_efuse)
> +		writel(LPASS_EFUSE_Q6SS_EVB_SEL, adsp->lpass_efuse);
> +
>   	/* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */
>   	writel(LPASS_BOOT_CORE_START, adsp->qdsp6ss_base + CORE_START_REG);
>   
> @@ -513,6 +518,7 @@ static int adsp_init_reset(struct qcom_adsp *adsp)
>   static int adsp_init_mmio(struct qcom_adsp *adsp,
>   				struct platform_device *pdev)
>   {
> +	struct resource *efuse_region;
>   	struct device_node *syscon;
>   	int ret;
>   
> @@ -522,6 +528,17 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,
>   		return PTR_ERR(adsp->qdsp6ss_base);
>   	}
>   
> +	efuse_region = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	if (!efuse_region) {
> +		adsp->lpass_efuse = NULL;
> +		dev_dbg(adsp->dev, "failed to get efuse memory region\n");
> +	} else {
> +		adsp->lpass_efuse = devm_ioremap_resource(&pdev->dev, efuse_region);
> +		if (IS_ERR(adsp->lpass_efuse)) {
> +			dev_err(adsp->dev, "failed to map efuse registers\n");
> +			return PTR_ERR(adsp->lpass_efuse);
> +		}
> +	}
>   	syscon = of_parse_phandle(pdev->dev.of_node, "qcom,halt-regs", 0);
>   	if (!syscon) {
>   		dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");