Re: [PATCH v6 8/8] remoteproc: qcom: Update QDSP6 out-of-reset timeout value

[Sibi Sankar]

On 9/8/22 6:53 PM, Srinivasa Rao Mandadapu wrote:
> Update QDSP6 out-of-reset timeout value to 1 second, as sometimes
> ADSP boot failing on SC7280 based platforms with existing value.
> Also add few micro seconds sleep after enabling boot core
> start register.

Please do check if the timeout that you hit is due to lack of
required clock/bus scaling. If so increasing the timeout would
be just an interim hack and might stop working in the future.

> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>   drivers/remoteproc/qcom_q6v5_adsp.c | 5 +++--
>   1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index e55d593..4414e23 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -34,7 +34,7 @@
>   /* time out value */
>   #define ACK_TIMEOUT			1000
>   #define ACK_TIMEOUT_US			1000000
> -#define BOOT_FSM_TIMEOUT		10000
> +#define BOOT_FSM_TIMEOUT		1000000
>   /* mask values */
>   #define EVB_MASK			GENMASK(27, 4)
>   /*QDSP6SS register offsets*/
> @@ -422,13 +422,14 @@ static int adsp_start(struct rproc *rproc)
>   
>   	/* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */
>   	writel(LPASS_BOOT_CORE_START, adsp->qdsp6ss_base + CORE_START_REG);
> +	usleep_range(100, 110);
>   
>   	/* Trigger boot FSM to start QDSP6 */
>   	writel(LPASS_BOOT_CMD_START, adsp->qdsp6ss_base + BOOT_CMD_REG);
>   
>   	/* Wait for core to come out of reset */
>   	ret = readl_poll_timeout(adsp->qdsp6ss_base + BOOT_STATUS_REG,
> -			val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT);
> +			val, (val & BIT(0)) != 0, 100, BOOT_FSM_TIMEOUT);
>   	if (ret) {
>   		dev_err(adsp->dev, "failed to bootup adsp\n");
>   		goto disable_adsp_clks;