[PATCH] ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290

[Horatiu Vultur]

Add interrupt support for the PHYs found on pcb8290. They are all
sharing the same interrupt line towards lan966x.

Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/lan966x-pcb8290.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
index af92bb12bc6cd..2ed53da914acb 100644
--- a/arch/arm/boot/dts/lan966x-pcb8290.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -68,41 +68,57 @@ &mdio0 {
 
 	ext_phy0: ethernet-phy@7 {
 		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy1: ethernet-phy@8 {
 		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy2: ethernet-phy@9 {
 		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy3: ethernet-phy@10 {
 		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy4: ethernet-phy@15 {
 		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy5: ethernet-phy@16 {
 		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy6: ethernet-phy@17 {
 		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy7: ethernet-phy@18 {
 		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 };
-- 
2.33.0