Re: [PATCH 0/9] Input: synaptics-rmi4 - Bootloader v7/v8 firmware update improvements

[Matthias Schiffer]

On Mon, 2022-08-15 at 09:43 +0200, Matthias Schiffer wrote:
> On Mon, 2022-06-27 at 10:31 +0200, Matthias Schiffer wrote:
> > On Wed, 2022-06-08 at 14:47 +0200, Matthias Schiffer wrote:
> > > This fixes the firmware update function with bootloader v8, allows to
> > > recover from interrupted updates with v7/v8, and does some code cleanup.
> > > 
> > > I believe that the code that allows to recover from a broken partition
> > > table is also necessary to make flashing a different partition table
> > > work at all, but I wasn't able to verify that, as I don't have any firmware
> > > images with different partition tables to test with. In any case, I'm
> > > pretty sure that it is working correctly now, as recovery from a mostly
> > > empty flash without partition table has been tested successfully.
> > > 
> > > I have only tested the new code with bootloader v8, and I don't have the
> > > documentation / interfacing guide for v7, so it would be great if anyone
> > > could check that I didn't break updates for v7.
> > 
> > Hi everyone,
> > 
> > any news regarding this patch series?
> > 
> > 
> > Kind regards,
> > Matthias
> 
> Ping - can we get this applied, or at least any kind of feedback?
> 
> 
> Kind regards,
> Matthias


Ping - another month has passed.

Should I resend the series? Not much has happened in the RMI4 driver,
so the patches still apply cleanly to latest linux-next.

Kind regards,
Matthias



> 
> 
> 
> > 
> > 
> > > Matthias Schiffer (9):
> > >   Input: synaptics-rmi4 - fix firmware update operations with bootloader
> > >     v8
> > >   Input: synaptics-rmi4 - introduce rmi_f34v7_check_command_status()
> > >     helper
> > >   Input: synaptics-rmi4 - fix command completion check for bootloader
> > >     v7/v8
> > >   Input: synaptics-rmi4 - rewrite partition table unconditionally
> > >   Input: synaptics-rmi4 - reset after writing partition table
> > >   Input: synaptics-rmi4 - make rmi_f34v7_erase_all() use the "erase all"
> > >     command
> > >   Input: synaptics-rmi4 - remove unneeded struct register_offset
> > >   Input: synaptics-rmi4 - simplify rmi_f34v7_start_reflash()
> > >   Input: synaptics-rmi4 - drop useless gotos in rmi_f34v7_do_reflash()
> > > 
> > >  drivers/input/rmi4/rmi_f34.c   |  16 +-
> > >  drivers/input/rmi4/rmi_f34.h   |  17 --
> > >  drivers/input/rmi4/rmi_f34v7.c | 349 +++++++--------------------------
> > >  3 files changed, 81 insertions(+), 301 deletions(-)
> > >