Re: [GIT PULL] Driver core changes for 6.0-rc1

[Olof Johansson]

On Thu, Sep 15, 2022 at 3:47 AM Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Wed, Sep 14, 2022 at 08:56:04PM -0700, Olof Johansson wrote:
> > On Wed, Sep 14, 2022 at 10:36 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote:
> > >
> > > On Wed, Sep 14, 2022 at 9:24 AM Olof Johansson <olof@xxxxxxxxx> wrote:
> > > >
> > > > Hi,
> > > >
> > > > On Wed, Sep 14, 2022 at 7:00 AM Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > > > >
> > > > > On Tue, Sep 13, 2022 at 09:28:27AM -0700, Olof Johansson wrote:
> > > > > > On Tue, Sep 13, 2022 at 8:15 AM Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Mon, Sep 12, 2022 at 10:24:43AM -0700, Olof Johansson wrote:
> > > > > > > > On Mon, Sep 12, 2022 at 10:23 AM Olof Johansson <olof@xxxxxxxxx> wrote:
> > > > > > > > >
> > > > > > > > > Hi,
> > > > > > > > >
> > > > > > > > > On Wed, Aug 3, 2022 at 7:16 AM Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > > > > > > > >
> > > > > > > > > > Saravana Kannan (11):
> > > > > > > > > >       PM: domains: Delete usage of driver_deferred_probe_check_state()
> > > > > > > > > >       pinctrl: devicetree: Delete usage of driver_deferred_probe_check_state()
> > > > > > > > > >       net: mdio: Delete usage of driver_deferred_probe_check_state()
> > > > > > > > > >       driver core: Add wait_for_init_devices_probe helper function
> > > > > > > > > >       net: ipconfig: Relax fw_devlink if we need to mount a network rootfs
> > > > > > > > > >       Revert "driver core: Set default deferred_probe_timeout back to 0."
> > > > > > > > > >       driver core: Set fw_devlink.strict=1 by default
> > > > > > > > > >       iommu/of: Delete usage of driver_deferred_probe_check_state()
> > > > > > > > > >       driver core: Delete driver_deferred_probe_check_state()
> > > > > > > > > >       driver core: fw_devlink: Allow firmware to mark devices as best effort
> > > > > > > > > >       of: base: Avoid console probe delay when fw_devlink.strict=1
> > > > > > > > >
> > > > > > > > > The last patch in this list regresses my HoneyComb LX2K (ironically
> > > > > > > > > the machine I do maintainer work on). It stops PCIe from probing, but
> > > > > > > > > without a single message indicating why.
> > > > > > > > >
> > > > > > > > > The reason seems to be that the iommu-maps property doesn't get
> > > > > > > > > patched up by my (older) u-boot, and thus isn't a valid reference.
> > > > > > > > > System works fine without IOMMU, which is how I've ran it for a couple
> > > > > > > > > of years.
> > > > > > > > >
> > > > > > > > > It's also extremely hard to diagnose out of the box because there are
> > > > > > > > > *no error messages*. And there were no warnings leading up to this
> > > > > > > > > strict enforcement.
> > > > > > > > >
> > > > > > > > > This "feature" seems to have been done backwards. The checks should
> > > > > > > > > have been running (and not skipped due to the "optional" flag), but
> > > > > > > > > also not causing errors, just warnings. That would have given users a
> > > > > > > > > chance to know that this is something that needs to be fixed.
> > > > > > > > >
> > > > > > > > > And when you flip the switch, at least report what failed so that
> > > > > > > > > people don't need to spend a whole night bisecting kernels, please.
> > > > > > > > >
> > > > > > > > > Greg, mind reverting just the last one? If I hit this, I presume
> > > > > > > > > others would too.
> > > > > > > >
> > > > > > > > Apologies, wrong patch pointed out. The culprit is "driver core: Set
> > > > > > > > fw_devlink.strict=1 by default", 71066545b48e42.
> > > > > > >
> > > > > > > Is this still an issue in -rc5?  A number of patches in the above series
> > > > > > > was just reverted and hopefully should have resolved the issue you are
> > > > > > > seeing.
> > > > > >
> > > > > > Unfortunately, I discovered this regression with -rc5 in the first
> > > > > > place, so it's still there.
> > > > >
> > > > > Ick, ok, Saravana, any thoughts?  I know you're at the conference this
> > > > > week with me, maybe you can give Olof a hint as to what to look for
> > > > > here?
> > > >
> > > > I'm not sure what you want me to look for. The patch turns on
> > > > enforcement of DT contents that never used to be enforced, so now my
> > > > computer no longer boots. And it does it in a way that makes it
> > > > impossible for someone not rebuilding kernels to debug to figure out
> > > > what happened.
> > >
> > > Hi Olof,
> > >
> > > Sorry for the trouble. It doesn't print any error messages because
> > > there are cases where it's block the probe where it wouldn't be an
> > > error. If I printed it every time fw_devlink blocked a probe, it'd be
> > > a ton of messages.
> > >
> > > Btw, when I enabled fw_devlink.strict=1, it was AFTER making changes
> > > that'll stop indefinitely blocking probes. So what you are seeing
> > > shouldn't be happening. After about 10 seconds (configurable), it
> > > should stop blocking the probes.
> >
> > "Shouldn't be happening" is a pretty bold statement. It's not actually
> > stuck on timeout in my case, and doesn't recover.
> >
> > Instead, what seems to be happening is that the PCIe driver, which
> > registers as a platform_driver here:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c#n255
> >
> > ends up registering, and the driver core now refuses to try to probe
> > the device matches, since they no longer have their suppliers
> > fulfilled (the smmu suppliers would not be tracked since they are
> > optional here:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/of/property.c#n1449
> >
> > So what happens is that the driver registration succeeds, but there
> > have been no devices matched to it. So when it returns to the platform
> > core, it thinks there are no devices bound to this driver, so it
> > should be unregistered:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/platform.c#n951
> >
> > That explains why the pcie core doesn't retry and just disappears, and
> > stops retrying.
> >
> > This is what it looks like with CONFIG_DEBUG_DRIVER and CONFIG_DEBUG_DEVRES:
> > [    5.178538] bus: 'platform': add driver layerscape-pcie-gen4
> > [    5.184301] bus: 'platform': __driver_probe_device: matched device
> > 3600000.pcie with driver layerscape-pcie-gen4
> > [    5.194498] platform 3600000.pcie: error -EPROBE_DEFER: supplier
> > 5000000.iommu not ready
> > [    5.202607] platform 3600000.pcie: Added to deferred list
> > [    5.208024] bus: 'platform': __driver_probe_device: matched device
> > 3800000.pcie with driver layerscape-pcie-gen4
> > [    5.218227] platform 3800000.pcie: error -EPROBE_DEFER: supplier
> > 5000000.iommu not ready
> > [    5.226333] platform 3800000.pcie: Added to deferred list
> > [    5.231814] bus: 'platform': remove driver layerscape-pcie-gen4
> > [    5.237761] driver: 'layerscape-pcie-gen4': driver_release
> >
> > Note that the platform driver registration sets flags to disable async
> > probing, supposedly so it can assume that any matching devices would
> > be found by the time registration returns:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/platform.c#n917
> > :
> >
> > /*
> > * We have to run our probes synchronously because we check if
> > * we find any devices to bind to and exit with error if there
> > * are any.
> > */
> > drv->driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
> >
> > /*
> > * Prevent driver from requesting probe deferral to avoid further
> > * futile probe attempts.
> > */
> > drv->prevent_deferred_probe = true;
> >
> >
> >
> >
> > Bottom line: How was this code tested? This seems far from mature,
> > this doesn't seem like that of an obscure condition to occur and it
> > could create minefields for others down the road if it's fragile.
>
> I've reverted it for now, let's get this worked out for later releases.

Thanks Greg!

-Olof