Re: [PATCH v2 4/4] ARM: dts: axp22x/axp809: Add GPIO controller nodes
From: Samuel Holland
Date: Fri Sep 16 2022 - 00:17:18 EST
On 6/26/22 08:03, Chen-Yu Tsai wrote:
> On Tue, Jun 21, 2022 at 11:42 AM Samuel Holland <samuel@xxxxxxxxxxxx> wrote:
>>
>> These PMICs all contain a GPIO controller. Now that the binding is
>> documented, wire up the controller in the device tree.
>>
>> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
>> ---
>>
>> (no changes since v1)
>>
>> arch/arm/boot/dts/axp22x.dtsi | 18 ++++++++++++++++++
>> arch/arm/boot/dts/axp809.dtsi | 19 +++++++++++++++++++
>> 2 files changed, 37 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
>> index a020c12b2884..5c233c84be92 100644
>> --- a/arch/arm/boot/dts/axp22x.dtsi
>> +++ b/arch/arm/boot/dts/axp22x.dtsi
>> @@ -67,6 +67,24 @@ battery_power_supply: battery-power {
>> status = "disabled";
>> };
>>
>> + axp_gpio: gpio {
>> + compatible = "x-powers,axp221-gpio";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + /omit-if-no-ref/
>> + gpio0_ldo: gpio0-ldo-pin {
>> + pins = "GPIO0";
>> + function = "ldo";
>> + };
>> +
>> + /omit-if-no-ref/
>> + gpio1_ldo: gpio1-ldo-pin {
>> + pins = "GPIO1";
>> + function = "ldo";
>> + };
>> + };
>> +
>
> We have
>
> reg_ldo_io0: ldo-io0 {
> pinctrl-names = "default";
> pinctrl-0 = <&gpio0_ldo>;
> /* Disable by default to avoid conflicts with GPIO */
> ...
> }
>
> in axp81x.dtsi . Should we add it here and for axp803.dtsi as well?
Actually, I don't think these pinctrl nodes should exist at all. The
regulator already sets the pinmux, because that is the only way to turn
the regulator on/off. So I think we should leave it alone here.
Regards,
Samuel
> Otherwise,
>
> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>