[PATCH] dt-bindings: input: Convert hid-over-i2c to DT schema

[Rob Herring]

Convert the hid-over-i2c binding to DT schema format. The supplies should
probably be specific to a specific device, but it seems they are already
in use otherwise. 'wakeup-source' is added as it was not explicitly
documented.

There's a few warnings for undocumented properties 'vcc-supply' and
'reset-gpios'. Those remain as they probably should have a specific
compatible as well.

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/input/hid-over-i2c.txt           | 46 -----------
 .../bindings/input/hid-over-i2c.yaml          | 78 +++++++++++++++++++
 2 files changed, 78 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.txt
 create mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.yaml

diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
deleted file mode 100644
index 34c43d3bddfd..000000000000
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
-  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply (3.3V)
-    - vddl-supply (1.8V)
-    - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
-  or powering it on, before it is ready for communication.
-- touchscreen-inverted-x: See touchscreen.txt
-- touchscreen-inverted-y: See touchscreen.txt
-
-Example:
-
-	i2c-hid-dev@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <3 2>;
-	};
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000000..2578b42e0d15
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
+  - Jiri Kosina <jkosina@xxxxxxx>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    hid@2c {
+        compatible = "hid-over-i2c";
+        reg = <0x2c>;
+        hid-descr-addr = <0x0020>;
+        interrupts = <3 2>;
+    };
+...
-- 
2.34.1