[PATCH v3 1/3] arm64: dts: rockchip: k3566-quartz64-a: fix names entries

[Alessandro Carminati]

Fixes: "No underscores in node names" general rule,
Fixes: The newly agreed on scheme for regulators to have
"-regulator" at the end

Signed-off-by: Alessandro Carminati <alessandro.carminati@xxxxxxxxx>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index d943559b157c..a30b17fd3c27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -28,7 +28,7 @@ gmac1_clkin: external-gmac1-clock {
 		#clock-cells = <0>;
 	};
 
-	fan: gpio_fan {
+	fan: gpio-fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
@@ -38,7 +38,7 @@ fan: gpio_fan {
 		#cooling-cells = <2>;
 	};
 
-	hdmi-con {
+	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
 
@@ -116,7 +116,7 @@ simple-audio-card,codec {
 		};
 	};
 
-	vcc12v_dcin: vcc12v_dcin {
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
@@ -139,7 +139,7 @@ vbus: vbus {
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+	vcc3v3_pcie_p: vcc3v3-p-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -151,7 +151,7 @@ vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
 		vin-supply = <&vcc_3v3>;
 	};
 
-	vcc5v0_usb: vcc5v0_usb {
+	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
@@ -165,7 +165,7 @@ vcc5v0_usb: vcc5v0_usb {
 	 * the host ports are sourced from vcc5v0_usb
 	 * the otg port is sourced from vcc5v0_midu
 	 */
-	vcc5v0_usb20_host: vcc5v0_usb20_host {
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -177,7 +177,7 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+	vcc5v0_usb20_otg: vcc5v0-usb20-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -187,7 +187,7 @@ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
 		vin-supply = <&dcdc_boost>;
 	};
 
-	vcc3v3_sd: vcc3v3_sd {
+	vcc3v3_sd: vcc3v3-sd-regulator {
 		compatible = "regulator-fixed";
 		enable-active-low;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -201,7 +201,7 @@ vcc3v3_sd: vcc3v3_sd {
 	};
 
 	/* sourced from vbus and vcc_bat+ via rk817 sw5 */
-	vcc_sys: vcc_sys {
+	vcc_sys: vcc-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-always-on;
@@ -212,7 +212,7 @@ vcc_sys: vcc_sys {
 	};
 
 	/* sourced from vcc_sys, sdio module operates internally at 3.3v */
-	vcc_wl: vcc_wl {
+	vcc_wl: vcc-wl-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_wl";
 		regulator-always-on;
@@ -249,7 +249,7 @@ &cpu3 {
 
 &cpu_thermal {
 	trips {
-		cpu_hot: cpu_hot {
+		cpu_hot: cpu-hot {
 			temperature = <55000>;
 			hysteresis = <2000>;
 			type = "active";
-- 
2.34.1