Re: [PATCH v2 3/3] clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs

[Bjorn Andersson]

On Fri, Sep 16, 2022 at 03:54:17PM +0530, Rajendra Nayak wrote:
> The USB controllers on sc7280 do not retain the state when
> the system goes into low power state and the GDSCs are
> turned off. This results in the controllers reinitializing and
> re-enumerating all the connected devices (resulting in additional
> delay while coming out of suspend)
> Fix this by updating the .pwrsts for the USB GDSCs so they only
> transition to retention state in low power.
> 
> Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
> Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>

> ---
> v2:
> *Updated the changelog
> *Updated .pwrsts for gcc_usb30_sec_gdsc
> 
>  drivers/clk/qcom/gcc-sc7280.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
> index 7ff64d4d5920..7b6e5a86c11f 100644
> --- a/drivers/clk/qcom/gcc-sc7280.c
> +++ b/drivers/clk/qcom/gcc-sc7280.c
> @@ -3126,7 +3126,7 @@ static struct gdsc gcc_usb30_prim_gdsc = {
>  	.pd = {
>  		.name = "gcc_usb30_prim_gdsc",
>  	},
> -	.pwrsts = PWRSTS_OFF_ON,
> +	.pwrsts = PWRSTS_RET_ON,
>  	.flags = VOTABLE,
>  };
>  
> @@ -3135,7 +3135,7 @@ static struct gdsc gcc_usb30_sec_gdsc = {
>  	.pd = {
>  		.name = "gcc_usb30_sec_gdsc",
>  	},
> -	.pwrsts = PWRSTS_OFF_ON,
> +	.pwrsts = PWRSTS_RET_ON,
>  	.flags = VOTABLE,
>  };
>  
> -- 
> 2.17.1
>