Re: [PATCH v2 1/1] hp-wmi: Setting thermal profile fails with 0x06

[Hans de Goede]

Hi,

On 9/12/22 20:26, Jorge Lopez wrote:
> Error 0x06 (invalid command parameter) is reported by hp-wmi module
> when reading the current thermal profile and then proceed to set it
> back. The failing condition occurs in Linux NixOS after user
> configures the thermal profile to ‘quiet mode’ in Windows.  Quiet Fan
> Mode is supported in Windows but was not supported in hp-wmi module.
> 
> This fix adds support for PLATFORM_PROFILE_QUIET in hp-wmi module for
> HP notebooks other than HP Omen series.  Quiet thermal profile is not
> supported in HP Omen series notebooks.
> 
> Signed-off-by: Jorge Lopez <jorge.lopez2@xxxxxx>

Thank you for your patch, I've applied this patch to my review-hans 
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans

> 
> ---
> Based on the latest platform-drivers-x86.git/for-next
> 
> Version 2 - Set bit (PROFILE_QUIET) only for non HP Omen Notebooks
> Version 1 - Original patch
> ---
>  drivers/platform/x86/hp-wmi.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
> index bc7020e9df9e..9a64601e217f 100644
> --- a/drivers/platform/x86/hp-wmi.c
> +++ b/drivers/platform/x86/hp-wmi.c
> @@ -177,7 +177,8 @@ enum hp_thermal_profile_omen_v1 {
>  enum hp_thermal_profile {
>  	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
>  	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
> -	HP_THERMAL_PROFILE_COOL			= 0x02
> +	HP_THERMAL_PROFILE_COOL			= 0x02,
> +	HP_THERMAL_PROFILE_QUIET		= 0x03,
>  };
>  
>  #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
> @@ -1194,6 +1195,9 @@ static int hp_wmi_platform_profile_get(struct platform_profile_handler *pprof,
>  	case HP_THERMAL_PROFILE_COOL:
>  		*profile =  PLATFORM_PROFILE_COOL;
>  		break;
> +	case HP_THERMAL_PROFILE_QUIET:
> +		*profile = PLATFORM_PROFILE_QUIET;
> +		break;
>  	default:
>  		return -EINVAL;
>  	}
> @@ -1216,6 +1220,10 @@ static int hp_wmi_platform_profile_set(struct platform_profile_handler *pprof,
>  	case PLATFORM_PROFILE_COOL:
>  		tp =  HP_THERMAL_PROFILE_COOL;
>  		break;
> +	case PLATFORM_PROFILE_QUIET:
> +		tp = HP_THERMAL_PROFILE_QUIET;
> +		break;
> +
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -1263,6 +1271,8 @@ static int thermal_profile_setup(void)
>  
>  		platform_profile_handler.profile_get = hp_wmi_platform_profile_get;
>  		platform_profile_handler.profile_set = hp_wmi_platform_profile_set;
> +
> +		set_bit(PLATFORM_PROFILE_QUIET, platform_profile_handler.choices);
>  	}
>  
>  	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);