[PATCH V1 4/9] PCI: tegra194: Handle errors in BPMP response

[Vidya Sagar]

The return value from tegra_bpmp_transfer indicates the success or
failure of the IPC transaction with BPMP. If the transaction
succeeded, we also need to check the actual command's result code.
Add code to do this.

Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index de477192c4b8..65c2c689fcd5 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1203,6 +1203,7 @@ static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
 	struct mrq_uphy_response resp;
 	struct tegra_bpmp_message msg;
 	struct mrq_uphy_request req;
+	int err;
 
 	/*
 	 * Controller-5 doesn't need to have its state set by BPMP-FW in
@@ -1225,7 +1226,13 @@ static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
 	msg.rx.data = &resp;
 	msg.rx.size = sizeof(resp);
 
-	return tegra_bpmp_transfer(pcie->bpmp, &msg);
+	err = tegra_bpmp_transfer(pcie->bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
 }
 
 static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
@@ -1234,6 +1241,7 @@ static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
 	struct mrq_uphy_response resp;
 	struct tegra_bpmp_message msg;
 	struct mrq_uphy_request req;
+	int err;
 
 	memset(&req, 0, sizeof(req));
 	memset(&resp, 0, sizeof(resp));
@@ -1253,7 +1261,13 @@ static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
 	msg.rx.data = &resp;
 	msg.rx.size = sizeof(resp);
 
-	return tegra_bpmp_transfer(pcie->bpmp, &msg);
+	err = tegra_bpmp_transfer(pcie->bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
 }
 
 static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
-- 
2.17.1