[PATCH] ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC

[Bonnie Lo]

From: Bonnie Lo <Bonnie_Lo@xxxxxxxxxx>

Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.

Signed-off-by: Bonnie Lo <Bonnie_Lo@xxxxxxxxxx>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 .../dts/aspeed-bmc-facebook-greatlakes.dts    | 247 ++++++++++++++++++
 2 files changed, 248 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..d9f417f2d7df 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1586,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
        aspeed-bmc-facebook-elbert.dtb \
        aspeed-bmc-facebook-fuji.dtb \
        aspeed-bmc-facebook-galaxy100.dtb \
+       aspeed-bmc-facebook-greatlakes.dtb \
        aspeed-bmc-facebook-minipack.dtb \
        aspeed-bmc-facebook-tiogapass.dtb \
        aspeed-bmc-facebook-wedge40.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..c368eb33efeb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+       model = "Facebook Greatlakes BMC";
+       compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               bootargs = "console=ttyS4,57600n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       iio-hwmon {
+               compatible = "iio-hwmon";
+               io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+                               <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+                               <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+                               <&adc1 5>, <&adc1 6>;
+       };
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&uart3 {
+       status = "okay";
+};
+
+&uart4 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&wdt1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_wdtrst1_default>;
+       aspeed,reset-type = "soc";
+       aspeed,external-signal;
+       aspeed,ext-push-pull;
+       aspeed,ext-active-high;
+       aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rmii4_default>;
+       no-hw-checksum;
+       use-ncsi;
+       mlx,multi-host;
+       ncsi-ctrl,start-redo-probe;
+       ncsi-ctrl,no-channel-monitor;
+       ncsi-package = <1>;
+       ncsi-channel = <1>;
+       ncsi-rexmit = <1>;
+       ncsi-timeout = <2>;
+};
+
+&rtc {
+       status = "okay";
+};
+
+&fmc {
+       status = "okay";
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+       };
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <50000000>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+       multi-master;
+       ipmb0@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+       multi-master;
+       ipmb1@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+       multi-master;
+       ipmb2@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c3 {
+       status = "okay";
+       multi-master;
+       ipmb3@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+};
+
+&i2c7 {
+       status = "okay";
+};
+
+&i2c8 {
+       status = "okay";
+       temperature-sensor@1f {
+               compatible = "ti,tmp421";
+               reg = <0x1f>;
+       };
+       // NIC EEPROM
+       eeprom@50 {
+               compatible = "st,24c32";
+               reg = <0x50>;
+       };
+};
+
+&i2c9 {
+       status = "okay";
+       multi-master;
+       ipmb9@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c10 {
+       status = "okay";
+};
+
+&i2c11 {
+       status = "okay";
+       eeprom@51 {
+               compatible = "atmel,24c128";
+               reg = <0x51>;
+       };
+       eeprom@54 {
+               compatible = "atmel,24c128";
+               reg = <0x54>;
+       };
+};
+
+&i2c12 {
+       status = "okay";
+       temperature-sensor@4f {
+               compatible = "lm75";
+               reg = <0x4f>;
+       };
+};
+
+&i2c13 {
+       status = "okay";
+};
+
+&adc0 {
+       ref_voltage = <2500>;
+       status = "okay";
+       pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+                       &pinctrl_adc2_default &pinctrl_adc3_default
+                       &pinctrl_adc4_default &pinctrl_adc5_default
+                       &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+       ref_voltage = <2500>;
+       status = "okay";
+       pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+                       &pinctrl_adc11_default &pinctrl_adc12_default
+                       &pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&uhci {
+       status = "okay";
+};
+
+&gpio0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+};
+
+
--
2.17.1

WIWYNN PROPRIETARY
This email (and any attachments) contains proprietary or confidential information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, please notify the sender and delete this email immediately.