[PATCH v7 1/8] dt-bindings: remoteproc: qcom: Add SC7280 ADSP support
From: Srinivasa Rao Mandadapu
Date: Tue Sep 20 2022 - 02:31:24 EST
Add ADSP PIL loading support for SC7280 SoCs.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
Changes since V6:
-- Update glink-edge property.
-- Add qcom,qmp property.
Changes since V5:
-- Remove qcom,adsp-memory-regions property.
Changes since V4:
-- Update halt registers description in dt bindings.
.../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml | 226 +++++++++++++++++++++
1 file changed, 226 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
new file mode 100644
index 0000000..878c975
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 ADSP Peripheral Image Loader
+
+maintainers:
+ - Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
+
+description:
+ This document describes the hardware for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. ADSP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-adsp-pil
+
+ reg:
+ minItems: 1
+ items:
+ - description: qdsp6ss register
+ - description: efuse q6ss register
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ clocks:
+ items:
+ - description: XO clock
+ - description: GCC CFG NOC LPASS clock
+ - description: LPASS AHBS AON clock
+ - description: LPASS AHBM AON clock
+ - description: QDSP XO clock
+ - description: Q6SP6SS SLEEP clock
+ - description: Q6SP6SS CORE clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: gcc_cfg_noc_lpass
+ - const: lpass_ahbs_aon_cbcr
+ - const: lpass_ahbm_aon_cbcr
+ - const: qdsp6ss_xo
+ - const: qdsp6ss_sleep
+ - const: qdsp6ss_core
+
+ power-domains:
+ items:
+ - description: LCX power domain
+
+ resets:
+ items:
+ - description: PDC AUDIO SYNC RESET
+ - description: CC LPASS restart
+
+ reset-names:
+ items:
+ - const: pdc_sync
+ - const: cc_lpass
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ four offsets within syscon for q6, CE, AXI and qv6 halt registers.
+ items:
+ items:
+ - description: phandle to TCSR MUTEX
+ - description: offset to q6 halt registers
+ - description: offset to CE halt registers
+ - description: offset to AXI halt registers
+ - description: offset to qv6 halt registers
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ const: stop
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ glink-edge:
+ type: object
+ description: |
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the ADSP.
+
+ properties:
+ interrupts:
+ items:
+ - description: IRQ from ADSP to GLINK
+
+ mboxes:
+ items:
+ - description: Mailbox for communication between APPS and ADSP
+
+ label:
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: lpass
+
+ qcom,remote-pid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: ID of the shared memory used by GLINK for communication with ADSP
+ maxItems: 1
+
+ gpr: true
+ apr: false
+ fastrpc: false
+
+ required:
+ - interrupts
+ - mboxes
+ - label
+ - qcom,remote-pid
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - qcom,qmp
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+ remoteproc@3000000 {
+ compatible = "qcom,sc7280-adsp-pil";
+ reg = <0x03000000 0x5000>,
+ <0x0355b000 0x10>;
+
+ interrupts-extended = <&pdc 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CFG_NOC_LPASS_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBM_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBS_CLK>,
+ <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+ <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+ <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+ clock-names = "xo", "gcc_cfg_noc_lpass",
+ "lpass_ahbs_aon_cbcr",
+ "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+ "qdsp6ss_sleep", "qdsp6ss_core";
+
+ power-domains = <&rpmhpd SC7280_LCX>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+ reset-names = "pdc_sync", "cc_lpass";
+
+ qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ qcom,qmp = <&aoss_qmp>;
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
--
2.7.4