Re: [PATCH] phy: qcom-qmp-pcie: Fix the SM8450 PCS registers

[Johan Hovold]

On Tue, Sep 20, 2022 at 12:15:56PM +0530, Vinod Koul wrote:
> On 10-09-22, 12:08, Manivannan Sadhasivam wrote:
> > In the PCS region, registers QPHY_V5_PCS_EQ_CONFIG4 and
> > QPHY_V5_PCS_EQ_CONFIG5 should be used instead of QPHY_V5_PCS_EQ_CONFIG2
> > and QPHY_V5_PCS_EQ_CONFIG3.
> > 
> > This causes high latency when ASPM is enabled, so fix it!
> > 
> > Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support")
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > ---

> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> > index 61a44519f969..cca6455ec98c 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> > @@ -11,7 +11,7 @@
> >  #define QPHY_V5_PCS_G3S2_PRE_GAIN			0x170
> >  #define QPHY_V5_PCS_RX_SIGDET_LVL			0x188
> >  #define QPHY_V5_PCS_RATE_SLEW_CNTRL1			0x198
> > -#define QPHY_V5_PCS_EQ_CONFIG2				0x1e0
> > -#define QPHY_V5_PCS_EQ_CONFIG3				0x1e4

Why are you removing these defines? (They are correct for sc8280xp.)

> > +#define QPHY_V5_PCS_EQ_CONFIG4				0x2e0
> > +#define QPHY_V5_PCS_EQ_CONFIG5				0x2e4
> 
> This conflicts with c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
> 
> where QPHY_V5_PCS_EQ_CONFIG5 was added as 0x1e0
> 
> Do we have a different v5 for SM8450 and SC8280XP?

I can confirm that the PCS_EQ_CONFIG defines added for sc8280xp matches
the vendor's headers for both the combo and USB PHYs.

Johan